Search:

Type: Posts; User: 95Gturbo

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. This tune is the final tune for this car. Rev...

    This tune is the final tune for this car. Rev match works well with no issues with surging on the rev match. Fuel trims are +/- 5% everywhere. Usually 29-30 degrees of timing on e85. 28 base and...
  2. Replies
    2
    Views
    297

    I'm running 21-22psi in the midrange and falling...

    I'm running 21-22psi in the midrange and falling to 17-18 psi by the shift on my 2010 with a 3 bar and meth injection. You have to scale torque management to get what you want out of it.
  3. This is the finished tune for that car. 91635

    This is the finished tune for that car.

    91635
  4. 91634

    91634
  5. I did mine from scratch. I'll post a screen shot...

    I did mine from scratch. I'll post a screen shot here soon of the rev match scalar.
  6. Replies
    1
    Views
    261

    Turn off dfco.

    Turn off dfco.
  7. Replies
    0
    Views
    84

    Sho vct changes

    Has anybody experimented with vct changes yet? A guy that is popular in the sct world said that the stock vct is garbage on these cars, and a ton of power is in cam timing, much like coyote cars that...
  8. Replies
    9
    Views
    503

    Well that is cool. Two different ways to do the...

    Well that is cool. Two different ways to do the same function lol.
  9. Replies
    9
    Views
    503

    90052

    90052
  10. Replies
    9
    Views
    503

    I'll post my tune, just don't pay attention to...

    I'll post my tune, just don't pay attention to the spark side of things because my car has meth injection and a 3 bar map sensor. The trans tune is pretty good on it. It shifts pretty hard.
  11. Replies
    9
    Views
    503

    I ended up coming up with the same work around on...

    I ended up coming up with the same work around on my 2010 Sho. I just use the clip inverse torque table to control my target load now and it works great. I had to scale some trans stuff around but it...
  12. To help with the updating speed. Log as few pids...

    To help with the updating speed. Log as few pids as you can. The scanner will still freeze after about 5 to 10 seconds but you should have long enough to log pulls. 3 to 4 pids are all you can log at...
  13. Replies
    398
    Views
    103,023

    I have an open ticket that i never received a...

    I have an open ticket that i never received a response to. It is on a 2010 Taurus Sho, so I realize it isnt I large priority on the list. My ticket number is 161248, I submitted it back in January.
  14. Replies
    7
    Views
    397

    Works great at all rpms except for 2k. When it...

    Works great at all rpms except for 2k. When it matches there, it still has a dip in rpm above 150-200 rpm and will oscillate there 2-3 times. Still havent gotten the customer to bring the car back...
  15. Thread: Bricked Pcm?

    by 95Gturbo
    Replies
    22
    Views
    1,516

    No charge at all, they created a label and...

    No charge at all, they created a label and emailed it to the owner, he shopped the pcm out to them, they fixed it in a week with the file we were trying to flash when it failed, and shipped it back....
  16. Replies
    7
    Views
    397

    This one is fully functioning flex. I have the...

    This one is fully functioning flex. I have the surge tune posted, I can post the remedied tune tomorrow. The 2018's don't have rev match on the manual cars, just the 2019+ cars. You can turn it off,...
  17. Replies
    1
    Views
    156

    OP vct on 2018+ Gt

    What are you guys doing with vct? The stock op angles are incredibly similar to the values that I have for gen 2 cars stock. I have moved them around a little and found no change to the positive in...
  18. Replies
    7
    Views
    397

    I was able to remedy this situation. I had to...

    I was able to remedy this situation. I had to decrease transport delay by 20%, decrease integral and proportional gain in closed loop control, and add a ton of deceleration fueling between 1000 and...
  19. Thread: nGauge issue

    by 95Gturbo
    Replies
    4
    Views
    264

    Thank you, I'll do that in a few days and update...

    Thank you, I'll do that in a few days and update this post.
  20. I only have experience with snow performace and I...

    I only have experience with snow performace and I would not recommend them. Ease of installation is about the same as any other kit as I would imagine, but the fittings for the tubing all leak on my...
  21. Replies
    7
    Views
    397

    2019 Gt rev match surge on flex tune

    I have a customer with a 2019 Gt that I have successfully tuned on flex. The only issue i have is on the rev match from 2500 and below, I have surging. I have modified proportional and integral gain...
  22. Thread: nGauge issue

    by 95Gturbo
    Replies
    4
    Views
    264

    Yes sir, I did.

    Yes sir, I did.
  23. The methanol injection kit on my Sho has steam...

    The methanol injection kit on my Sho has steam cleaned the whole intake system on it. It looks like the engine was just assembled yesterday.
  24. Thread: nGauge issue

    by 95Gturbo
    Replies
    4
    Views
    264

    nGauge issue

    So I am tuning a customers 2017 Mustang Gt, and he has an nGauge that he wants a few different files loaded onto, no problem. I tuned the car with my mpvi2, and hooked up the nGuage. I went to export...
  25. Thread: Bricked Pcm?

    by 95Gturbo
    Replies
    22
    Views
    1,516

    Pcm has been installed and the car runs great....

    Pcm has been installed and the car runs great. Thanks a million to the guys at Hptuners HQ. Good as new.
Results 1 to 25 of 125
Page 1 of 5 1 2 3 4