Search:

Type: Posts; User: evan.s@hptuners

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Sticky: For vehicles equipped with VVEL, they will not...

    For vehicles equipped with VVEL, they will not have exhaust cam tables, only VVEL and intake cam tables. For non-VVEL tables you are provided with both intake/exhaust tables
  2. Sticky: VTC tables should already be available. If you...

    VTC tables should already be available. If you run across an OS where they are not, send in a support ticket and I'll add them ASAP
  3. You have to have an MPVI2 plugged in to open the...

    You have to have an MPVI2 plugged in to open the file. All new market releases require this
  4. Both are being worked on but there is no ETA

    Both are being worked on but there is no ETA
  5. Responded to your ticket but since it's posted...

    Responded to your ticket but since it's posted here publicly: tuned with ecutek. They lock the read. Have to return to stock first.
  6. I'll reply to your ticket when it's ready. I just...

    I'll reply to your ticket when it's ready. I just wanted to post that publicly since there have been a couple tickets from confused people on this platform.
  7. Also the controller type for the VR30 is...

    Also the controller type for the VR30 is SH_7253_331, but on downloading latest beta (when it's ready, it isn't yet) it should auto-identify as that controller.
  8. 0x7F error on Nissan is almost exclusively...

    0x7F error on Nissan is almost exclusively battery load too high (if it's not bad USB cable related). Need to make sure everything is turned off, these things are finnicky. No A/C, no headlights, no...
  9. Just means we didn't recognize your ID. For...

    Just means we didn't recognize your ID. For manual selection, in the hardware menu select "SH_7059" for the 370Z. Then it should read
  10. Replies
    1
    Views
    227

    https://forum.hptuners.com/showthread.php?76252-In...

    https://forum.hptuners.com/showthread.php?76252-Intro-to-Nissan-Infiniti-tuning-with-HP-Tuners

    Check out the "Estimated Indicated Torque"
  11. Replies
    1
    Views
    195

    There is no "main spark" table on these vehicles....

    There is no "main spark" table on these vehicles. Please see our guide.
  12. I haven't received a support ticket yet so the...

    I haven't received a support ticket yet so the necessary data has not been added in order for him to perform a read. Again, if you have an issue with reading, please submit a support ticket so it can...
  13. The controller for the VR30DDTT is SH_7253_331....

    The controller for the VR30DDTT is SH_7253_331. However we will need to create a definition for this particular OS, please open a support ticket with an infolog and one will be made.
  14. That's because the correct hardware to select is...

    That's because the correct hardware to select is SH_7058. Anything else isn't the correct hardware.
  15. Replies
    5
    Views
    625

    What's your OS ID for the vehicle?

    What's your OS ID for the vehicle?
  16. Q50 3.0t support has not been released yet

    Q50 3.0t support has not been released yet
  17. Replies
    1
    Views
    219

    Can you get a read from the car? If you can email...

    Can you get a read from the car? If you can email the file to support@hptuners.com I can add it to my list of things to do.
  18. Replies
    2
    Views
    254

    Yes the developer immo switch will allow you to...

    Yes the developer immo switch will allow you to do that.
  19. Sticky: Knock Threshold ...

    Knock Threshold

    http://www.hptuners.com/forum/attachment.php?attachmentid=86260&stc=1

    If the knock sensor feedback minus the noise floor is greater than this value, then knock is detected. This...
  20. Sticky: Intro to Nissan/Infiniti tuning with HP Tuners

    This guide offers useful hints and suggestions for tuning Nissan and Infiniti vehicles. Its aim is to explain the functionality of Nissan/Infiniti-specific parameters rather than be a full tuning...
  21. Replies
    3
    Views
    265

    Get an infolog, then send in a support ticket...

    Get an infolog, then send in a support ticket with your debug.dat and infolog attached. https://support.hptuners.com/
  22. Replies
    11
    Views
    1,273

    Y61 is currently in the final testing phase.

    Y61 is currently in the final testing phase.
  23. Replies
    14
    Views
    1,527

    85109 Direct from EcuTek's website, they do...

    85109

    Direct from EcuTek's website, they do not call it flame or combustion rate. Perhaps they called it that in an old version?
  24. Replies
    5
    Views
    544

    Looks like we've got a broken RPM axis, sorry...

    Looks like we've got a broken RPM axis, sorry about that. What's your OS ID, I'll go in and fix it
  25. Replies
    1
    Views
    379

    Yes the controller is different, it's unsupported.

    Yes the controller is different, it's unsupported.
Results 1 to 25 of 40
Page 1 of 2 1 2