Search:

Type: Posts; User: coachcrow56

Page 1 of 12 1 2 3 4

Search: Search took 0.00 seconds.

  1. My current tune is pretty good, I think. I have...

    My current tune is pretty good, I think. I have no KR with a 2.8 pulley, but like everyone, I look for more power. Should I add the LQ4 MAF to my tune,and tune it, or just keep what I have? I...
  2. So if the lb/hr is less at 11,500 Hz in the table...

    So if the lb/hr is less at 11,500 Hz in the table that ZZP sent me, then it is leaner, right? I am assuming that you can take a stock MAF table and tune it, and it will flow the same as an LQ4...
  3. Confused about MAF air flow----need help

    Air flow confuses me, (might be my cancer treatment) so could someone set me straight.

    I have a 2000 GTP that at 6000 rpm shows a MAF flow of 57.84 lb/min at 10644 Hz. I am pretty sure I am not...
  4. Yes, the car runs better and feels better, but my...

    Yes, the car runs better and feels better, but my gas mileage has suffered. I have tuned the car for both, OL and CL, so I can switch whenever the weather gets crazy. The main problem I have is...
  5. 2.8 PULLEY vs. 3.0 pulley vs. 3.2 pulley--HP and TORQUE

    This morning I tested a 2.8, a 3.0, and a 3.2 pulley on my 2000 GTP. I made 3 runs, about 20 minutes apart, same location, TCS off. I found some difference in power and torque, so I need some...
  6. Replies
    0
    Views
    75

    Check My Tune!

    I need some of the Tuning Experts on this Forum to check out my tune and see if you can make any suggestions. I went out today in 100 degree heat and scanned my car with a short full throttle run,...
  7. I never use an auxiliary plug or power...

    I never use an auxiliary plug or power converter----I just make sure my laptop is charged.
  8. Run MAF Open Loop Only, or MAF and Narrowbands??

    I have questions for all of the V6 tuners. My 2000 GTP does not use VE tables. It is strictly MAF. I have tuned the car using a MAF AFR ERROR histogram, using the method described by Russ K. I...
  9. Replies
    2
    Views
    155

    A lot of tuners change their AFR stoich to 14.4...

    A lot of tuners change their AFR stoich to 14.4 to try and compensate for Ethanol at 10%. But your factory narrowbands are ALWAYS trying to adjust (and maintain) your AFR to 14.7.

    If you are...
  10. Replies
    0
    Views
    208

    2000 Pontiac GTP Transmission

    2000 Pontiac Grand Prix GTP transmission for sale. Rebuilt with heavy duty parts--shifts like new---no leaks. Trans has 40,000 since rebuild by Rich Mize at Auto Super Center on Eastman Road in...
  11. Replies
    96
    Views
    42,859

    Sticky: That's it. I don't have the Pro feature set---I...

    That's it. I don't have the Pro feature set---I have Track Addict and Race Render
  12. Come on guys---there has to be one person out...

    Come on guys---there has to be one person out there who can confirm that I am either right or wrong-----one person----I know there are tuners out there that log boost----come on!!

    I fixed my...
  13. Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  14. Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  15. Replies
    5
    Views
    267

    Administrators----PLEASE DELETE THIS THREAD

    Administrators----PLEASE DELETE THIS THREAD
  16. Logging Boost---should it be negative????

    I made an attempt at logging Boost on my 2000 GTP, but I am getting negative readings driving around town and a positive reading of 7+ under hard acceleration. I am attaching a scan, and my scan...
  17. Replies
    96
    Views
    42,859

    Sticky: To say that I am disappointed in HPTuners would...

    To say that I am disappointed in HPTuners would be an understatement. I upgraded to MPVI2 over a year ago, and now I can't use my LC-1 wideband. And the solution offered by HPTuners is to...
  18. Replies
    15
    Views
    5,329

    I upgraded to MPVI2 over a year ago, and at that...

    I upgraded to MPVI2 over a year ago, and at that time my LC-1 wideband would work in my scanner. Since then my laptop died, got a new one, and downloaded the new 4.6.0 VCM SUITE. Now my LC-1...
  19. Replies
    5
    Views
    267

    I had 4.4.4, and I managed to get back as far as...

    I had 4.4.4, and I managed to get back as far as 4.0.6.0. I wish I could go back to 2.0 or 2.4. My wideband worked with those versions.
  20. Replies
    5
    Views
    267

    TUNER SUITE 3.0 still available???

    Is there anyway to download a VCM Suite from years ago? My wideband would work with 3.0 when it was introduced. Now with the new version 4.4.4, I cannot get my LC-1 WB to work. I have...
  21. Yes, my EGR is deleted, but I am getting the 5...

    Yes, my EGR is deleted, but I am getting the 5 volts I need for the WB from the EGR connection. I have EGR volts set up in my Channels. That is how I set up my WB in the older versions of VCM...
  22. Frustrated with New 4.4.4---wideband will not work

    Over a year ago I upgraded to MPVI2----and downloaded the software---I think it was 3.0. Wideband and everything worked fine. Two months ago my laptop died. I got a new laptop and downloaded...
  23. LC-1 Wideband---help with set up in Scanner

    I need help. I cannot get my LC-1 wideband to work with my scanner, Version 4.4.4. I am scanning the EGR volts, Air Fuel Ratio Commanded, and I have watched every You Tube video on how to set up...
  24. Need Wideband---AFR Error Help--Please!!

    I have MPVI-2 and I am logging thru the EGR for my LC-1 wideband, but I cannot get it to work. I want to add AFR ERROR too, but I understand that will not work until my wideband is working...
  25. So how are you supposed to write a new tune to...

    So how are you supposed to write a new tune to the car if you are not connected?
Results 1 to 25 of 297
Page 1 of 12 1 2 3 4