Search:

Type: Posts; User: regorih

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. yes in post #1 I've attached the start up data...

    yes in post #1 I've attached the start up data log. I did a total of 4 start ups. 1st one starts up ok, 2 and 3 did not, then on the 4th one it starts up.
  2. I enabled P0016 and its not getting set. In the...

    I enabled P0016 and its not getting set. In the log I posted it has a pid for the cam and crank, and they both appear to be working.
  3. I'm thinking I might need to run a bigger spark...

    I'm thinking I might need to run a bigger spark plug gap, maybe what I have is too tight?
  4. C6 F1a94, 2bar SD OS, FIC 200= delayed start up?? help

    I?m turning this set up, and my start ups are not consistent. Sometimes it starts right up without any issue and then I could turn it off and start it and it just cranks and cranks and cranks and it...
  5. Can anyone help me set up the trans 2018 charger for a 3200 stall?

    Anyone care to help me set up this 2018 with a 3200k circle d converter? Ill pay you for your help.

    143198

    post and email if possible.

    Thanks
  6. Help, issues on start up 2018 charger with a procharger BTR stg 4 cam

    Hi,

    I have this 2018 Dodge charger that received a stage 4 BTR cam. The car already had a procharger with injectors from procharger. I currently having an issues with a delayed start up. I've...
  7. 2012 Camaro zl1 stock acts like the TB is closing @ wot but its not. HELP

    Guys I have this 2012 camaro zl1 thats 99% stock besides an upper pulley upgrade. The zl1 had the supercharger rebuilt since it was making grinding sounds.

    Now that its back together its acting...
  8. 2013 Ram issues after Cam insall: engine stalls when coasting to a stop. HELP!

    I'm in need of some help. I know this should be a quick fix for someone on here.

    I have a 2013 Ram 1500 that recently had a stage 2 comp cam installed and the MDS disabled. Everything on the...
  9. NPP exhaust codes after Corsa catback install on C8 NPP valves need to recalibration

    Anyone run into these issues on the C8s? After getting an aftermarket catback system installed we receive codes for the NPP valves. The only way to clear them is to have the NPP valves recalibrated...
  10. C7 ZO6 LT4 VS CT5 Blackwing LT4 - Spark table

    Hey guys, I'm trying to figure out what are the differences with the LT4 found in the 2019 C7 zo6 and the 2023 CT5 Blackwing LT4.

    I was looking over the spark table for both vehicles and the 6.2...
  11. Replies
    44
    Views
    5,279

    I been wondering as well

    I been wondering as well
  12. How about port injection from 2highPSI, a DSX...

    How about port injection from 2highPSI, a DSX lowside, and the factory LT4 system and you can support 900rwhp on full e85 content? Its doable
  13. Replies
    20
    Views
    3,842

    What is the C8 calibration file closer too? A...

    What is the C8 calibration file closer too? A 2021 Silverado (Global B) or 2019 C7 ZR1? Also, any plans to create a C8 course in the near future?
  14. probably missing something. these are much...

    probably missing something. these are much easier to tune than when I first started this post.
  15. Replies
    7
    Views
    1,597

    132330 There ya go

    132330

    There ya go
  16. 2021 ZL1 with the unlocked T93 - not going good, trans not happy! Help & tips needed

    Guys, I need your help with this new T93 TCM procedure.

    Here's the background story. Last year this 2021 ZL1 received one of those modified T87A TCMs and I did some trans tuning on it with no...
  17. Replies
    3
    Views
    1,033

    Have you checked all your grounds, and fuse...

    Have you checked all your grounds, and fuse blocks?
  18. Replies
    4
    Views
    1,448

    Im in houston. Send me an email for contact...

    Im in houston.


    Send me an email for contact information: [email protected]
  19. If I remember correctly - 2014 silverados only...

    If I remember correctly - 2014 silverados only came with 6 speed autos.
  20. Don't ever copy a Driver Deman table from any...

    Don't ever copy a Driver Deman table from any vehicle into your file. Always start from your stock file. Don't go crazy adjusting everything below WOT.
  21. 1. If your going to really want some help you'll...

    1. If your going to really want some help you'll need to have a wideband to verify your AFR @ wot
    2. Areas I personally would adjust would be the spark tables. Not much of a cushion in the event of...
  22. Can you list any the entire modification parts...

    Can you list any the entire modification parts list?
  23. Ive tuned 3 too high psi port injection kits. If...

    Ive tuned 3 too high psi port injection kits. If you questions regarding plumbing I would contact Mike, they have those kits configuration down to a tee
  24. Replies
    3
    Views
    708

    It literally already is set up like that from the...

    It literally already is set up like that from the factory. Unless someone went wild in the setting for tour. I normaly make small adjustments to tour to keep the car civilized
  25. those are always fun to calibrate with the added...

    those are always fun to calibrate with the added step of HP Tuners AI lol
Results 1 to 25 of 197
Page 1 of 8 1 2 3 4