Search:

Type: Posts; User: rkuper82

Search: Search took 0.00 seconds.

  1. Data is correct when viewing preview but incorrect when I create MP4 file

    I modified an existing overlay and added some existing and custom objects. The custom object dragstats.rro I found while searching this forum. The data highlighted in the first screen shot is...
  2. Replies
    2
    Views
    194

    Yes all three tables are the same.

    Yes all three tables are the same.
  3. Replies
    2
    Views
    194

    Intake CAM Angle Question

    I am curious about the Intake CAM Angle PID. You can see from the screen shots I have the desired angle to start phasing 1* around 5200RPM and step up from there to 4* per the cam vendors...
  4. P0016 - Crankshaft Position DTC after enabling VVT

    2010 Camaro SS
    Ported Heads
    SE Headers / Xpipe
    Roto CAI
    GPI VVT2 CAM

    I decided to enable VVT on my car. Car seemed to run great! In fact if I am not mistaken under 5K it even seemed to perform...
  5. Replies
    4
    Views
    391

    Well as it turns out I'm an even a bigger moron...

    Well as it turns out I'm an even a bigger moron than blindsquirrel is proving me to be by correcting my grammar. "Broken" clip on "brake" booster vac sensor hose. Replaced clip and I'm back in...
  6. Replies
    4
    Views
    391

    Breaks hard at idle after CAM Swap

    Just finished a cam swap(GPI VVT2) on 2010 L99. I have a Tuner working on the tune now. I have asked him the question already but he has not gotten back to me yet. He usually takes 24-28hrs to...
  7. Replies
    0
    Views
    470

    HP tuners asking for HP and Torque

    My buddy just got mvpi2. He just uploaded his first file for his tuner. The file asked him for HP and Torque numbers. Anyone seen this before and why?
  8. Replies
    2
    Views
    383

    GPI VVT SS2 BARO Tables

    I have the base Variable Valve Timing table from GPI but the actual table is to blurry to read.
    https://w6q4b2d9.rocketcdn.me/wp-content/uploads/2017/06/GPI-VVT-Settings-L99.pdf
    The instructions...
  9. Hey just now seeing this a 4 months later. I...

    Hey just now seeing this a 4 months later. I finished my tune finally. Care to take a look I will send you my files.
  10. Replies
    1
    Views
    599

    Final Tune Feedback

    So after months of tuning this is where I ended up. I already paid a Pro Tuner to look it over but wanting some feed back. I would log the car make changes to my file then compare to what he gave me...
  11. Now that you mention it I have noticed some...

    Now that you mention it I have noticed some vibration lately. I think it is my headers/pipes hitting frame. Have not had a chance to get under the car yet. Do you think that could cause the knock?
  12. What is an acceptable amount of Retard? Suggestions?

    Just curious what an acceptable amount of KR is. Seems everyone has different opinion on the matter. Personally I start to get worried when I see anything higher than 1-2 consistently. This is the...
  13. Replies
    1
    Views
    299

    2010 Camaro Channel setup

    Anyone willing to share a decent channel setup? LTH, Catback, CAI
  14. Can not find Driver Pedal Axle Torque & Driver Final Axle Torque

    Trying to add Driver Pedal & Final Axle Torque on my HP Scanner software. I cant find them in the channel selector. Any ideas why?
  15. Replies
    6
    Views
    1,328

    thanks for the suggestions! THE COT is pretty...

    thanks for the suggestions! THE COT is pretty straight forward. I have been reading on DFCO looks like about 50/50 in terms of disabling. Looks like there are several ways of disabling also. Some...
  16. Replies
    6
    Views
    1,328

    Logs

    102202102203

    Attached logs and current tune with DOD delete and CAT delete.
  17. Replies
    6
    Views
    1,328

    I have disabled DOD already.

    I have disabled DOD already.
  18. Replies
    6
    Views
    1,328

    question about MAP and Spark

    I have a really basic question. Trying to understand what the car is doing doing during these these drops in MAP & Spark(See Attachment). Trying to learn but there does not seem to be a lot of good...
  19. Looking for a Base Tune to work off of 2010 Camaro L99

    2010 SS/RS L99 SE Longtube Headers & Catback

    Looking for a good template to start off of for a 2010 L99 with headers and exhaust. I plan on doing a CAI, Ported Intake, Ported Throttle Body, Ported...
  20. Replies
    2
    Views
    1,225

    Hey i have been looking for a base tune to work...

    Hey i have been looking for a base tune to work off of. I have a 2010 SS LTH & Catback. Do you think this would be a good base tune to start off of?
Results 1 to 20 of 20