Search:

Type: Posts; User: harmless

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    1,847

    Turn off DFCO. For timing, add a lot of retard in...

    Turn off DFCO. For timing, add a lot of retard in the decel area of the map. Boom, pop, crackle... Have at it.
  2. Recommend me a new bottom end. Carnage picture.

    Everyone says this and that about what a stock bottom end ls will take. Well this is a stock ls2 piston and block. On to bigger and better things. Time to build it I guess. :banghead:
    Estimated to...
  3. I started getting knock(not reported in the...

    I started getting knock(not reported in the scanner!!!) around 33. I back it off till I heard it was gone. It has to be very very close to the wall of starting to loose power. Will take 31 degrees...
  4. No kits. Stock fuel system maxed out. I fear...

    No kits. Stock fuel system maxed out. I fear aftermarket filters/primary decat will push me past what the stock fuel system can do.

    https://i.ibb.co/fY6nQ0x/image1.jpg
    This is my most recent...
  5. I get 15 mpg on the highway with e60... True e85...

    I get 15 mpg on the highway with e60... True e85 and i just put a picture in front of the gas gauge.......

    For me and why i love running corn all the time is the huge amount of timing I have down...
  6. Replies
    12
    Views
    7,638

    I did not try that yet. Here is the link, i...

    I did not try that yet.


    Here is the link, i just used the one on the download page. http://files.hptuners.com/VCM%20Suite/VCM%20Suite%20(Beta).msi
  7. Replies
    12
    Views
    7,638

    Download the beta right now and you will be very...

    Download the beta right now and you will be very pleased. There are now base position, lock-pin, and intake/exhaust max lines. Also a small base table. I contacted support and this was their...
  8. Replies
    3
    Views
    1,243

    I had an issues while getting an old gm car to...

    I had an issues while getting an old gm car to accept that it has a new ac system in it. My easiest bypass was to set the ac settings to analog. It knows you want the ac on, but it doesnt know how to...
  9. Replies
    12
    Views
    7,638

    I?m assuming I should treat this table with care,...

    I?m assuming I should treat this table with care, increasing percentage wise till limp mode is no longer an issue?
  10. Replies
    12
    Views
    7,638

    That person was me. The min and max stoich only...

    That person was me. The min and max stoich only work in driver demand mode(wot). Hp tuners made it clear to me that 1 lambda was hard coded in. Maybe they just haven?t given us all the table we need...
  11. Replies
    12
    Views
    7,638

    M156 cam timing tuning/tune limitations.

    2010 C63
    After receiving a great tune from MEP performance, I decided to start fresh and give it a go myself.
    Fastest time in the quarter mile using e85 is 11.94 @119mph. All season tires, no burn...
  12. Replies
    8
    Views
    4,117

    Car is still commanding 1 all the time during...

    Car is still commanding 1 all the time during idle and cruise.
  13. Replies
    8
    Views
    4,117

    Yes I am. I have 42-44 degrees of timing at...

    Yes I am.

    I have 42-44 degrees of timing at cruise. It drives absolutely perfect at the moment. Just won?t react to changes different than a lambda value of 1.
    At delta temps cool than...
  14. Replies
    8
    Views
    4,117

    Requested lambda/cruising fuel consumption

    I recently received a tune through a very good tuner. The tune is amazing and car runs like a dream. But I cant leave good enough alone. I am currently tuned on e85 and go through a quarter tank of...
Results 1 to 14 of 14