Search:

Type: Posts; User: Camaro6

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    258

    MPVI2 credits question

    We tuned a vehicle with our #1 device and the owner moved to another state. Can we have his credits transferred to our #2 device? We use our #2 for out of state customers and will send it to them if...
  2. 07 TBSS trans read error - x36 exceeded number of attempts

    T42 trans module - Cannot read the trans on a 2007 Trailblazer SS, but can read/write the ecm without issues. Anyone else have this issue? Using the latest Beta, tried the std version, vehicle has...
  3. 07 TBSS trans read error - x36 exceeded number of attempts

    T42 trans module - Cannot read the trans on a 2007 Trailblazer SS, but can read/write the ecm without issues. Anyone else have this issue? Using the latest Beta, tried the std version, vehicle has...
  4. 07 TBSS trans read error - x36 exceeded number of attempts

    2007 Trailblazer SS E67 - T42 I'm getting a "x36 exceeded number of attempts" error when reading the tcm side of things. Ecm side of things reads fine and I can load the tunechanges without an...
  5. Watch your immediate axle tq drop under the...

    Watch your immediate axle tq drop under the actual tq taking timing down with it :-) I do a bunch of drop in piston, cam, and blower vehicles so I've dealt with this situation many times.
    Your...
  6. Replies
    5
    Views
    955

    You don't want to add to the minimum timing...

    You don't want to add to the minimum timing tables. This will make the vehicle surge more than likely. If you are going too high over the rpm when you're under, then change your proportional idle...
  7. Replies
    7
    Views
    1,199

    Wondering if you figured it out. 2020 Edge ST...

    Wondering if you figured it out. 2020 Edge ST goes 1-3 with oem setting, but I made my sport mode shift 1-2 2-3 etc.
  8. Replies
    15
    Views
    2,287

    I know your reply is old, but just noticed it...

    I know your reply is old, but just noticed it when I was looking something up on here. Wanted to reply so others would know. They do in-fact do have transient fueling for closed loop and open loop...
  9. If low side has pressure and high side is...

    If low side has pressure and high side is dropping, look for a kinked line or a line that is restricting flow. Tuner might also be hitting a limit or blowing fuel straight out the exhaust if he...
  10. I just sent in a 2019 Q60 read that gives a...

    I just sent in a 2019 Q60 read that gives a checksum error when opening it in vcm editor. Owner dropped it off today hoping to get it back tomorrow......

    Ticket ID: 205184
    Subject: 2019 Q60...
  11. Please post the trans tune we are talking about..

    Please post the trans tune we are talking about..
  12. Replies
    9
    Views
    1,761

    Is the virtual tq and driver demand tables oem...

    Is the virtual tq and driver demand tables oem stock or altered calibration? That could be culprit #1. Is the MAF scaled to compliment the NW tb along with the throttle area limits "max area" data...
  13. Replies
    7
    Views
    2,027

    I tune them all the time. Let me know if you need...

    I tune them all the time. Let me know if you need a remote tune for it once completed or questions on products to make it perform well.
  14. Replies
    3
    Views
    675

    Sounds like you need it retuned. PM me if you're...

    Sounds like you need it retuned. PM me if you're interested in having that done remotely or in the chicagoland area.
  15. Replies
    10
    Views
    2,049

    If you tune the truck correctly, the oem dd...

    If you tune the truck correctly, the oem dd tables and virt tq tables don;'t need to be touched. I tune these engines with major boost and have stock tables and no issues.
  16. Do you have a tune to upload and log showing the...

    Do you have a tune to upload and log showing the issue? I would guess that the tune has the pedal and tq tables changed which is freaking the trans out on tq numbers and making it shift out of the...
  17. The ZL1 with bolt ons will run E85 (E70 here in...

    The ZL1 with bolt ons will run E85 (E70 here in Chicago) no problem. Same thing with LT1 and Prochargers, I tune them for E all the time and have no issues.
  18. You will be able to run the car on the stock tq...

    You will be able to run the car on the stock tq and driver demand tables when tuned correctly. Surge is from the driver demand and tq tables. I fix these types of tunes all the time.
  19. Replies
    9
    Views
    1,185

    You can change the % of change to update the ecm...

    You can change the % of change to update the ecm data it uses and the amount of fuel used before it changes as well. I go with 1% and then .002 on the other two values.
  20. High Ambient Temp after ReFlash - Gen V LT1 & LT4

    I've noticed after a reflash on my 2018 Camaro SS (LT1) the ambient air temp will go very high 118 degrees when it's only 80-90 degrees outside. This changes the VE fueling (if temp enabled) and I...
  21. I just finished a 2014 Jeep with a stg2 Prodigy...

    I just finished a 2014 Jeep with a stg2 Prodigy Turbo kit a few weeks ago. If the others that posted don't get you squared away, PM me. I have s/c tunes for them as well will work for a base tune and...
  22. Replies
    21
    Views
    5,372

    The prodigy turbo kit uses the 3bar from a...

    The prodigy turbo kit uses the 3bar from a caliber and this is what I mainly see people using on modded Jeeps - 61.85kpa 7.0kpa 0.10v
  23. Thread: Stumbling idle

    by Camaro6
    Replies
    6
    Views
    1,170

    Check you o2 sensors. Might have a lazy one not...

    Check you o2 sensors. Might have a lazy one not giving a signal and the car going rich make it stumble. Run it in open loop and see how it is. How are the o2s reading on start up and idle?
  24. Replies
    14
    Views
    2,200

    Turn off the temp setting option, tune VVE, then...

    Turn off the temp setting option, tune VVE, then turn it on with your actual temp displayed in the PID. The car references the ambient temp. And watch out for the reflash which makes ambient read...
  25. Have you changed your voltage settings in the...

    Have you changed your voltage settings in the tune?
Results 1 to 25 of 90
Page 1 of 4 1 2 3 4