Search:

Type: Posts; User: IARLLC

Page 1 of 20 1 2 3 4

Search: Search took 0.00 seconds.

  1. You may just need to drive it enough to get the...

    You may just need to drive it enough to get the O2 and cat to confirm "readiness".

    Also, new rule in California, all tuned cars fail even if the tuning improved their emissions.
    ...
  2. Replies
    9
    Views
    364

    Not all rebuilds require a new TCM.... Is the TCM...

    Not all rebuilds require a new TCM.... Is the TCM being replaced?
  3. Replies
    5
    Views
    673

    Fast learn is not that important for personal...

    Fast learn is not that important for personal vehicles as we can drive a little and let it learn slow. It is more important when we have touchy customers that want to sit down in a finished product...
  4. Replies
    51
    Views
    19,737

    Just a thought. On many vehicles, the accessory...

    Just a thought. On many vehicles, the accessory power is disconnected during cranking. So if there is a way to get power to that wake-up wire before the key gets to the run position and not lose...
  5. Replies
    1
    Views
    233

    If you throw T87A in that little box to the upper...

    If you throw T87A in that little box to the upper right corner of your screen, you will get to read about everybody else who went through the exact same process.
  6. Replies
    5
    Views
    473

    The good old days...

    The good old days...
  7. Replies
    4
    Views
    301

    No. That is a stock rig that belongs to a friend....

    No. That is a stock rig that belongs to a friend. Runs fine. Will run better if I ever get to play with it.
  8. Replies
    4
    Views
    301

    File from 2013 Suburban 2500

    File from 2013 Suburban 2500
  9. Replies
    4
    Views
    576

    I had the same situation on a 2005 Armada. I...

    I had the same situation on a 2005 Armada. I ended up learning about the competitors and using one of them. It was not the same as having all of the controls at my fingertips but it worked and the...
  10. The "replace TCM process" that you refer to must...

    The "replace TCM process" that you refer to must take your transmission's solenoid data from the old TCM to transfer it to your new TCM. Since you don't have the old TCM, the solenoid data from your...
  11. There is only 1 connector on the oil pump and it...

    There is only 1 connector on the oil pump and it goes through the front cover (passenger side of the ballancer) to a type of pressure control solenoid on the actual pump. Only 2 wires so it is all...
  12. Today a client came by with his F150. The phasers...

    Today a client came by with his F150. The phasers have started to rattle on start-up. Since we are waiting for the calibration to be uh calibrated I tried unplugging the connector on the front of the...
  13. I am really curious to get the real truth on this...

    I am really curious to get the real truth on this deal too. The way you explained it is exactly the issue that sooooo many Toyotas have. Whether sludge or a weak lock-pin spring or a weak phaser...
  14. Possible that the steering position sensor got...

    Possible that the steering position sensor got damaged during the shifter replacement.

    Also agree about flashing the BCM at least. Since tap up/tap down runs through it on 6L80E systems.
    ...
  15. I think that he means half way between 1.00 and...

    I think that he means half way between 1.00 and 1.20.... so 1.10. So your minimum value can stay.
  16. Replies
    6
    Views
    436

    I just saw your thread. For Fan #1 you need to...

    I just saw your thread. For Fan #1 you need to lower your "On Temp AC On" to about 203 for a stock thermostat. Yours is at 284 which maxes out the setting turning it off. Give it a try and let me...
  17. Replies
    13
    Views
    639

    You really need to tune the MAF for the larger...

    You really need to tune the MAF for the larger intake tube. That will probably take care of your P0171 and P0174 and will make it run much better.

    As for the cat codes, if you can put the cats...
  18. Replies
    13
    Views
    639

    Disabling the codes keeps the computer from...

    Disabling the codes keeps the computer from looking for them in the future but if you already set permanent codes before disabling them..........they are permanent until proven ok.

    Why did you...
  19. HPTuners equipment can read the OS from the T87....

    HPTuners equipment can read the OS from the T87. Then you should be able to look up that OS and see what rigs it is calibrated for, gear ratio etc. Since it has a T87 in it now, you can do a full...
  20. Replies
    6
    Views
    628

    Your 17 6L80E already has a compatible...

    Your 17 6L80E already has a compatible calibration in it as it is from a Silverado. As long as it is wired to the E92A properly (no T87A), you can read it and tune it now.
  21. Replies
    6
    Views
    628

    5FDP is correct that, "The 6 speed was not...

    5FDP is correct that, "The 6 speed was not offered with the 6.2 past 2015, so a 2017+ file that is a 6.2/6L80e combo does not exist."

    The 6L80E was offered in the next style 2015 SUVs behind the...
  22. Good info. Thanks for letting us know.

    Good info. Thanks for letting us know.
  23. Thanks for the kind words, Bob. Real good to hear...

    Thanks for the kind words, Bob. Real good to hear from you. I am happy that you got it worked out.

    Best to you and your family!
  24. Replies
    2
    Views
    428

    No. There are changes in the TCM between 2009 and...

    No. There are changes in the TCM between 2009 and 2010. Maybe a 2015 would bolt in. Not sure.
  25. Replies
    90
    Views
    13,309

    You can change the VIN in the cluster with an MDI...

    You can change the VIN in the cluster with an MDI or Mongoose GM/GMPro and a GMTDS https://www.acdelcotds.com/ subscription. We used to be able to buy it in 2 day chunks with unlimited VINs. Now you...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4