Search:

Type: Posts; User: Homer

Page 1 of 16 1 2 3 4

Search: Search took 0.00 seconds.

  1. I don't understand how an intake manifold gasket...

    I don't understand how an intake manifold gasket would impact oil temp sensor? Also, open loop should not limit RPM, or was the car in limp mode? How was max RPM tested in park or neutral? If so,...
  2. Replies
    12
    Views
    273

    Without seeing your tune, if your AFR is off at...

    Without seeing your tune, if your AFR is off at WOT your fuel trims will do bubkas as the power enrichment table takes over (depending on where WOT voltage is set).
  3. Replies
    3
    Views
    100

    FWIW - according to a recent blog by the tuning...

    FWIW - according to a recent blog by the tuning school they are able to squeeze out a little more top end power by tuning VVT.
    https://thetuningschool.com/blogs/news/vvt-in-123
  4. Replies
    5
    Views
    132

    FYI - to get to the tune repository, log into HP...

    FYI - to get to the tune repository, log into HP home site or click on your user name if already logged in and there will be a link to tune repository on the left hand side.
  5. Replies
    5
    Views
    132

    The tuning repository has 2015 and 2016. 93050...

    The tuning repository has 2015 and 2016.
    93050
    93051
  6. Replies
    8
    Views
    255

    I don't do this for a living and your comment had...

    I don't do this for a living and your comment had me thinking pros might now be using some type of software to help set-up initial timing maps along with rules of thumb and experience?

    OP if you...
  7. Replies
    8
    Views
    255

    So are you saying pro tuners are using math to...

    So are you saying pro tuners are using math to calculate max timing?
  8. Replies
    8
    Views
    255

    All depends on the how high of an octane you are...

    All depends on the how high of an octane you are willing to run. Attached is a stock tune and 93 octane canned tuned for a 5.7 for you to compare.

    93011
    93012
  9. Replies
    5
    Views
    108

    Just as luciddeath stated, you can adjust the...

    Just as luciddeath stated, you can adjust the limits of tables to whatever "scale" you want. You can do this by selecting the row or column name which will cause a gui to pop up where you can...
  10. Thread: ANN vs NN tuning

    by Homer
    Replies
    2
    Views
    135

    It refers to this setting. 93004 If you have it...

    It refers to this setting.
    93004
    If you have it enabled, the PCM pretty much controls PT and transients via sensor readings and algorithms. If disabled the PCM refers to tables such as VE.

    FYI...
  11. Replies
    29
    Views
    1,805

    Here is how I would disable it. 93003

    Here is how I would disable it.
    93003
  12. Thanks bud! Really appreciate it.

    Thanks bud! Really appreciate it.
  13. Replies
    3
    Views
    89

    Bingo. I original stated it was not listed as...

    Bingo. I original stated it was not listed as being supported but forgot Dodge Ram and then just plain Ram...it's listed in the supported vehicles.
  14. Thanks Jay. Still don't have a copy for a manual...

    Thanks Jay. Still don't have a copy for a manual but I am in no rush.
  15. Replies
    5
    Views
    102

    Nevermind you said 2012 Ram.

    Nevermind you said 2012 Ram.
  16. Not a screen shot but appears to have what you...

    Not a screen shot but appears to have what you need.

    https://forum.hptuners.com/showthread.php?63308-id1000-injector-data&highlight=ID1000
    ...
  17. 2015 challenger hell cat manual stock tune needed

    Anyone have a read of the stock tune on a 2015 (actually any year will work) Hell Cat with manual trans (no autos please)? All I see in the repository are automatics.
  18. Replies
    5
    Views
    355

    I know this post is several months old but here...

    I know this post is several months old but here is something I ran into when I was having my manual challenger tuned for a SC. Probably not the same problem but stumped my tuner as the first tune I...
  19. Replies
    17
    Views
    706

    You mean this one?...

    You mean this one?
    https://forum.hptuners.com/showthread.php?77372-Can-timing
  20. FWIW I was comparing the wrangler P113E with the...

    FWIW I was comparing the wrangler P113E with the challenger P0159 and one thing that stood out on the challenger code is that it sets when the PCM does not detect a rich to lean switch within a...
  21. BTW if you don't have a FSM you can use this link...

    BTW if you don't have a FSM you can use this link to get access to the online chilton's site which is hosted by a library in NM....
  22. I don't see how the O2 monitors (at least the...

    I don't see how the O2 monitors (at least the catalyst and O2 sensor) complete with a P113 or slow to respond O2?
    92854

    It was always the O2 sensor and catalyst that would not complete for me...
  23. Like I said, I spent a long time trying to get...

    Like I said, I spent a long time trying to get all my monitors to pass until I finally set all the DTC to stock (I am running a magnuson SC and long tube headers with high flow cats). I don't know...
  24. Could be your air tables are set high causing...

    Could be your air tables are set high causing lazy throttle response.

    https://forum.hptuners.com/showthread.php?62333-Bigger-Throttle-Body&p=466902&viewfull=1#post466902

    BTW don't think the...
  25. Replies
    56
    Views
    42,581

    Yes, click on the axis name and it will allow you...

    Yes, click on the axis name and it will allow you to change the values.
Results 1 to 25 of 383
Page 1 of 16 1 2 3 4