Ok thank you
Type: Posts; User: jamesv1956
Ok thank you
Ok thank you
What program do you use to locate the tables in the ecm?
I was looking at a tune file for a 2016 Cadillac atsv and some of the diagnostic codes are labeled as P0033 - Turbocharger/Supercharger Bypass Valve Control
Gircuit/ Open
P0034 -...
Ok I will start with the sensor config and come back to this thread once I get that set up. Thank you
Ok thank you I will look at the ac Delco and see what I can find
We?re did you find a wiring diagram for the ats-v I have been searching and I can?t find it
Ok thank you I will look into this I am having a hard time finding wiring diagrams
can you use the stock ecm from a 2015 gmc yukon with a 5.3 to control the turbo wastegate and blow off valve. And if so how would you go about wiring this up.
thank you
Ok I will and I will post the tune and a log tomorrow when I am working on it
I have a 2004 5.3 from a suburban that I swapped into a 81 k5 blazer when you push the throttle to wot from a standing start it feels like a older car with a carb when they bog, I feel that it is...
I have a 1998 4l60e behind a 2004 chev 5.3 I am wondering what I should do tune wise for the 4l60e so that it will live and to make it consistent as possible for drag racing with out harming the...
Ok thank you
Ok thank you, that is a very informative thread that you I will have to read the whole thing some time. I am also wondering what filters you use for ve tuning?
Is this the only filter needed to get good data or should I be filtering anything else for maf tuning
Ok thank you
I am tuning a 2004 5.3 with dual exhaust ported throttle body and a aftermarket intake tube I am working on tuning the maf but I?m not sure how to setup the maf filters to get good data and what to...
It has a electronic throttle body
Yes it has its own bung how do you setup filters so with filters it probably makes it a lot faster and easier
ok would having one new o2 sensor and one old one have something to do with that what is that injector tip temp that you are logging is that something a person should log when doing this what does a...
ok so i got the trims lower i added 30% to my maf table which brought my trims much closer they still need more work but its getting better im not sure if this is the right way to do it but it seems...
so should the 02s be occilating together
i think the seven percent one is my ve log i just had that table setup and it was just going in the backround
121852 circled is the percent error of maf table by comparing wideband to commanded here at about same time shot as yours it is showing -2.2 percent this is what i was talking about am i looking at...
yes that is exactly how ive been doing it
it is a 2004 lq4 swapped into a 1970 ford crew cab with true dual exhaust and a cam i tuned the ve and maf seperatly here is the ve log from my last log for it almost perfect 121840 maf last log run...