The wideband takes anywhere from 30 to 60 seconds to warm up the sensor then it starts reading the actual Afr readings. Mine reads 16.4-17.2 for about 30 seconds when first cold starting the car and...
Type: Posts; User: prolss
The wideband takes anywhere from 30 to 60 seconds to warm up the sensor then it starts reading the actual Afr readings. Mine reads 16.4-17.2 for about 30 seconds when first cold starting the car and...
x2.
I also would like to know if there is a GM PID's for Gear, Indicate P/N/R
no you dont have to create any new PIDs because they are all the in the math parrameters, go to the math parameter = Lanbda & Afr and select AFR Error or EQ Ratio Error if you want lambda and that...
Hi can someone please email me a copy of the Bluecat tuning table [email protected] Thanks
Try changing the timing maybe bring it down around 600rpm to 1200rpm, also your highstall might be to tight for the cam not letting it slip enough at idle to low revs.
Hi I have got the car to not accelerate as much when put in gear without accelerating. I have dropped my idle in PN/G from 850/820 to 750/720, dropped the timing in idle spark advance In Gear also...
ok ill give it ago
61117This is a the Scanner file of the car picking up speed without the throttle being used.
Yes it was . Its a 2800 to 3200 it flashes to about 3100 in 2nd and 3rd.
All my other cars that i had high stalls in them would roll back on a hill in gear without braking or accelerating they...
Hi Ben i have put the pro tune back in. I don't have a wideband yet. The pro tune also makes the car accelerate without the throttle being pressed. My car is idling at about 850rpm in neutral and...
The car idles at 840rpm.
Hi I have a LS1 with a 232/234 595 598 112 cam with a 4l60e, 2800 to 3200 high stall converter, 4.10 gears. I start the car put it in drive without accelerating and the car takes of like I'm...
They were the same because i changed both of them to the proper idle airflow. If you compare the tunes in my first post to the my last post tunes then u will c the difference. Thanks about the o2...
Tune Order:
1. 60624 2004 Original Dyno tune - worked
2. 60626 Used this 2004 Base file to create tune = Speed Density - Enhanced (RTT)
3. 60625 This is the file saved once I pressed Speed...
Tune Order:
1. 60624 2004 Original Dyno tune - worked
2. 60626 Used this 2004 Base file to create tune = Speed Density - Enhanced (RTT)
3. 60625 This is the file saved once I pressed Speed...
I fixed the problem it was the Base Running Airflow - idle airflow the operating system i used to get the Speed Density - Enhanced (RTT) operating system was stock as a rock and the cam in my car...
Can u please tell me which PID's i need to see what is going on at idle.
60620 This was my tune before I did a FLASH "write entire" the new Operating system was Speed Density - Enhancded...
I forgot to add when the car is cold it idles fine only when warm and hot it wont idle.
Sorry my tunes were posted on first post maybe I need to explain it better. I will re-paste my tunes below.
60615 1Bar SD tune
60616 Standard tune before change which did work.
60617 ...
No i didn't the standard tune was done by a tuner on a dyno to suit cam exhaust gears and mafless tune. I copied the standard tune into the 1 bar sd tune. I will try what u suggested tomorrow....
Hi I'm new to tuning and HP Tuners, I changed my Operating system to a 1 bar SD map and now my car will not idle in park/gear, everything else is fine it drives the same. I put all the settings from...
I have the same problem changed operating system to 1bar sd, runs fine switch it of when warm go to start it and it wont idle. Changed back to original operating system and same thing. If you work it...