ok you got it right!! I had to change only the manifold switch close table. I did as you said and change the 4 tables (open-close-dod) for that of 4.8l.
Now my fuel trim is right on target!!! you...
Type: Posts; User: HPdaveLS
ok you got it right!! I had to change only the manifold switch close table. I did as you said and change the 4 tables (open-close-dod) for that of 4.8l.
Now my fuel trim is right on target!!! you...
ok I did my homework and put the data from the e38 injector flow into the tune of the ctsv. I took the data from the columns that matched and then interpolated between them. but when I do that it...
here is where I am ... I did as blindsquirrel said I copied the columns that match 4.8 2010 in my tune of ctsv 2007 "offset vs press vs ignv" and I interpolated between the columns horizontally. Then...
thank you blindsquirrel!!! i appreciate your help!! i ll try it tomorrow and I'll get back to you if that solved my problem.
I need help putting the data injectors correctly from the e38 into an e67. In the flow rate vs press of the e67 I don't have the same rows as the e38 (18.6 to 111.4 vs 18.6 to 92.8) and in the ctsv...