...nobody responded. deleting.
Type: Posts; User: stylin99
...nobody responded. deleting.
First time with a Gen 2 viper (2002). Have an older MPVI2 so it should work. The scanner won't connect, and Editor won't let me do a read. I get Protocol failed. Is it possible a previous custom tune...
Thanks.
So when reading a stock 16 RS3 it appears to read just fine and I can write updates just fine. But a significant amount of parameters are just not there. If I do a compare against a stock 16 GT, I...
So after attempting this Lower Clip change, it still wouldn't do a burnout. Well, actually, it would sporadically allow it about 1 in 10 attempts and only from manual 1, which made no sense. Once TQ...
Thank You Russ! I had not thought to check under Trans clips. Will get with the customer, and report back.
- Steve
Just added the file in OP above.
This is with lots of experimental changes to turn it off, so almost everything is deactivated to find it, with no success.
So, I have a customer that is dead set on doing burnouts in his 2011 6.2 Raptor, roush supercharged. :rolleyes:When on the brake pedal, the truck will not allow the throttle blade to stay open at...