I had the same problem but was able to get it to work by pairing down the list of channels before updating the dongle. I don't recall all of the steps, but I had to write it several times before it...
Type: Posts; User: Ratssled
I had the same problem but was able to get it to work by pairing down the list of channels before updating the dongle. I don't recall all of the steps, but I had to write it several times before it...
This post helped me.
I've used RTT to tune the VE very effectively on several engines. Then I decided to removed my MAF entirely to see what difference it would make. I then turned the MAF DTC's off...
Is there a PCM/OS combination that is capable of running Coil Near Plug ignition like an LS1, but uses an SBC/BBC firing order 1-8-4-3-6-5-7-2?
I know about the L21 BBC (i have one) but I'm unable...
Just need to clarify a key point. What firing order do you have to use with the 02 Express calibration and 24x with CNP ignition: LS, or SBC?
Which are the transient fueling tables?
What approach do you take to adjust them?
I suspect that a GEN 3 ECU, or least an LS1 calibration, can't handle the volume of air at tip-in for my engine. ...
Thanks for chiming in.
The reason I question using the LS1 calibration is because of the Tip In lean spike and the unbalance (split bank) fuel trims. I'm obviously not tuning an LS1 engine, or...
Now I'm curious to know what options exist in specific LS Calibrations. Is there a cross reference chart that lists all of the options, like DBC vs DBW B's, E-fans, 4L80E, etc?
Is it common practice...
The one in the repository is for a 1500 V6/4L60E
12208322
BTW, will that work with a 24x reluctor and Coil Near Plug ignition?
I need advise on which OS to run for my BBC swap. I've been tuning and tuning an 02 Camaro OS but can't seem to get it tuned the way I think it should run.
My biggest issues are:
- Bank 2(even)...
Is it now possible to graph multiple WBO2 sensors in VCM Scanner?
Or is this still the case?
What channel did you use to view the cam offset?
And what calibration file are you using?
My name is Glen, and I live in burbs west of Philly. I enjoy building and racing cars. My need for speed applies to work as well, but I don't work in the automotive industry. I started tuning on Gen...