Hey guys i have a 2018 f150 2.7 eco with just intake and exhaust running ngk hx heat range 7 plugs gapped .028" and i had been running diablosport tow tune and 91 tunes. I am planning on eventually...
Type: Posts; User: upc1259
Hey guys i have a 2018 f150 2.7 eco with just intake and exhaust running ngk hx heat range 7 plugs gapped .028" and i had been running diablosport tow tune and 91 tunes. I am planning on eventually...
Hey we have a 2013 GMC 1500 4x4 that had the 5.3l. It has been swapped to a all stock 2007 L76 6.0l. I am using the factory e38 ecu. I have tried a few 6.0 repository tunes and modified the 5.3l data...
Hey was wondering if anyone has completed a cp3 conversion on a lml using hp tuners? Vehicle is already delete tuned using BD. i know that efi live is capable as well as ez lynk. Also what about the...
Hey we have a 2000 dodge ram 2500 5.9l here with the cats deleted and we are getting a cat efficiency code p0420. the ecu is a jtec+. i have disabled the down stream o2 (even though it doesn't seem...
OK tried using beta and it would give me live data for 02's and tps but that's all any other idea's thanks.
I have a 2000 Dodge 2500 4x4 with 5.9L gas jtec+ ecu here that i can open, modify and write files in editor. Can connect to vehicle with scanner, populates vehicle vin and info. Can scan for codes,...
Working on a 2000 Mustang 4.6. When I go to read the ecm it says there is no valid vin and gives the option to generate one in order to license it.
What would cause this to not pick up the vin (even...
Help after Updating VCM SUITE getting Unhandled exception error. program opens but cannot use, will not connect to anything. These are the details of the error.
See the end of this message for...
I appreciate the responses, but, the process of tuning is not what I am having problems with. This vehicle does not respond to fueling changes after the "write" is done.
Thanks for the replies. I have created histograghs plotting the fueling error, pasted special and muliplied by %. Have also just tried adjusting the area of the vve table and maf calibration chart...
I do not disagree at this point but my problem is I cannot get the fuel trims or fueling at all to respond to changes that I am making! I assume I am doing something wrong!
Here is a tune file. Do not have a log file(one step at a time)
Will attempt to post a tune file shortly(still Learning). I have tried with maf on and off, by "dialing in the maf" do you mean maf calibration airflow vs frequency table? I do have a wideband...
I have a 2008 Chev with a new 4.8 engine and lumpy cam, and am having problems with the vve tuning. Have gotten the startup sorted out and it idles ok in closed loop but runs rough in open loop and...