Search:

The link in the original post does not take me anywhere. Sorry for the necro but wanted to go through the sticky before starting a new thread

I believe that there is a way to configure it to look for a specific COM port but I cannot remember.
I do not have this issue with finding the wideband. Have you repolled for parameters recently?...

Just got a response from support saying that they are not looking to offer support for the ECU. That sucks but it is what it is.

Mods close thread

I see on HPTuners vehicle support it lists that there is support for a 5.7L Tundra but nothing for a 4.7L, is there a reason for this?
I have a customer's truck, 2008 4.7L Tundra, that he wants to...

Yep I was able to get the right things showing on the graph thanks Bill.

I guess I chose the wrong config without realizing it. All good it is working perfectly now :)

I will have to double check when I get home but I believe that I do know that there are two Lambda channel configs. I cannot remember what they are called.
I may have selected the improper Lambda...

Thank you I thought so but was just double checkin

Wow that is a great help. I had not seen that write up before.
I am new to Fords and my buddy has a 2014 GT that he wants to do headers and the like to so that should help us.

If someone makes changes on his tune via just the editor it should be free no? If he emails them his file and then they just edit and send back I thought that was free but I may be mistaken.
Ayyyy...

If you are asking if someone can make adjustments to your tune file and then send it back to you so you can write it the answer is yes.

For free though is a different question...

Does anyone have some Ford layouts they like using when data logging? I am working on a 2014 Mustang GT that I am having some trouble getting Lambda to show up on a graph or on a chart.
I have only...

Have you checked device manager? If you download Putty on your computer you can make sure that you are receiving a signal when you are hooked up as well

Gotcha thanks Kevin

That is correct. But even if I swapped in the DBC?

The main thing I am trying to do is get the entire interior from an 03-07 and put it in my 1999. Figured it might be easier to just swap the...

Okay, could I put the 99 PCM in the 05 truck though?

Okay let me lay out the details of a hypothetical situation.

1. I have a 2005 Silverado - Not licensed to the PCM, yet.
2. I have a 1999 Silverado - Licensed to the PCM

Can I put my 1999 VIN...

Yeah HPTuners is one reason I won?t be doing the upgrade just yet.

Yeah I feel like I was having that same issue too but not exactly how you did. Something was strange about it.

I am hoping I didn't just fudge up my truck too. Haven't tried to see if it is multi vehicle or just this one. I did repoll and that did not seem to do anything.

As the title states I am unable to scan a 2007 Audi A4 2.0 I was able to connect to the vehicle but whenever I go to scan it and hit the button nothing happens.

Any ideas? I'm lost on this one.

I actually ended up figuring out the issue a little bit after I made this post. Not sure why I didn't get thread updates but anyways...

I had to delete the file for the truck and then repoll for...

Hey guys so I have set up a channel in my channel configuration for an AEM 30-0300 wideband gauge. This channel is set up so that I can use the gauges serial cable capability, I use a serial to USB...

112423

Yeah it has something to do with my motor mounts I believe. Also yes I knew the P01 computers still monitor knock with the codes turned off haha I just was tired of the CEL.

I don't really want...

MEGA EDIT:

So I am trying to log my wideband gauge via serial to usb. I believe that I have the proper channel configuration set up however whenever I start scanning the channel disappears. Any...