Search:

Type: Posts; User: sevinn

Page 1 of 17 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    100

    You're dropping way too much low side for leaning...

    You're dropping way too much low side for leaning it out to really help. The HPFP is happiest when it's supplied about 72psi, and you're dropping to around half that in some of these logs making...
  2. Replies
    8
    Views
    100

    Well, it's out of fuel. You need to supply more...

    Well, it's out of fuel. You need to supply more low side to it for sure and the high side might pick up.
  3. Replies
    8
    Views
    100

    You are way out of fuel. Your lo side drops into...

    You are way out of fuel. Your lo side drops into the 30s and you're definitely letting EOI extend way too far on the high side.

    Are you trying to pull this shot off the rail? Have you done a plug...
  4. Honestly I've seen it once and don't have an...

    Honestly I've seen it once and don't have an answer for it. I think it was related to low battery voltage but I can't honestly say.
  5. p16f3 by chance?

    p16f3 by chance?
  6. Yeah I'll agree with you there I don't think your...

    Yeah I'll agree with you there I don't think your PC specs are the problem
  7. I find that this happens alot on slower laptops...

    I find that this happens alot on slower laptops when too many pids are being polled.
  8. Replies
    3
    Views
    164

    Never on a read.

    Never on a read.
  9. Replies
    9
    Views
    347

    $1399 + 10 credits! + tcm unlock + tcm credits ...

    $1399 + 10 credits! + tcm unlock + tcm credits

    Gonna be pricey
  10. Replies
    9
    Views
    347

    Seems that they only posted it to their social...

    Seems that they only posted it to their social media, and the front page of this site but it is available.

    https://www.hptuners.com/product/e90-modified-ecm-purchase-ecm-exchange-service/
    ...
  11. Thread: Unlock TCM??

    by sevinn
    Replies
    1
    Views
    89

    Yes. 4

    Yes. 4
  12. Replies
    7
    Views
    230

    Its commanding a fat EQ, probably running even...

    Its commanding a fat EQ, probably running even fatter, short shifting, and taking a minute to shift.

    Shoot me a PM. I'll send you a config to take logs with and we'll make you faster.
  13. Replies
    7
    Views
    230

    There are lots of other great tuners out there as...

    There are lots of other great tuners out there as well as on this board. We can help him here provided we get the right data.
  14. Replies
    7
    Views
    230

    I have doubts that this car is running how it...

    I have doubts that this car is running how it should based on what I see here. Do you have any wot logs? From your description of looking at your wideband it's way too rich, and the commanded...
  15. So just to clarify, my 30-0310 will need to be...

    So just to clarify, my 30-0310 will need to be modified before I can use it via the method "MakesBadDecisions" posted above? I use a 30-0334 in my tuning kit, I'd just like to use one of the 310s I...
  16. Thanks. I'll be honest I had no idea the 310...

    Thanks. I'll be honest I had no idea the 310 could do can without dr mike magic to begin with. I'm going to copy this for my vette. Greatly appreciated!
  17. Any way you can pm or post some pics of your...

    Any way you can pm or post some pics of your 30-0310 setup? I have two of them sitting around that I'd like to mess with.
  18. Don't do that. lt4 is a lower compression engine...

    Don't do that. lt4 is a lower compression engine than lt1. Quick way to run into trouble!
  19. Correct. Honestly no harm in setting it to 85 as...

    Correct. Honestly no harm in setting it to 85 as well if that's what you want.
  20. You aren't logging tcc pressure or current gear...

    You aren't logging tcc pressure or current gear but with your 4th apply set to 125 in

    Ideal lock would need to be played with. Easiest to find this on a dyno or at the track.

    If you want to...
  21. 6l80s usually only really care about shift mph. ...

    6l80s usually only really care about shift mph. Bring that down and give it lead time.
  22. I doubt it was spinning, but that doesn't mean...

    I doubt it was spinning, but that doesn't mean tcs isn't doing it. I would possibly try to get a little separation between your max and engine torque, but just do the pulls with tcs off and see if it...
  23. Replies
    63
    Views
    5,726

    https://cartrainingonline.com/courses/gm/ ...

    https://cartrainingonline.com/courses/gm/

    Bottom of page
  24. Replies
    63
    Views
    5,726

    I'll keep an eye out and will be buying most of...

    I'll keep an eye out and will be buying most of them I'd guess :)
  25. Replies
    47
    Views
    2,657

    They are available for my OS as of this morning...

    They are available for my OS as of this morning in the beta. Now to get my car off the lift and actually get to messing with them
Results 1 to 25 of 425
Page 1 of 17 1 2 3 4