ok, thanks for the clearification.
Type: Posts; User: smokinHawk
ok, thanks for the clearification.
i like the new axis definition ability for the resoulution, but i see on my 99 TA that the tables like spark and VE are not underlined, so that means that years arnt modifiable right?
this is what i used for my 42lb green tops
cam was a 224/224-114, 347 cubes
nother quick question under the colum ses enable there is a check box there what does that do? should i uncheck them for my maf?
cool thanks for the help.
ok thanks for clearing that up.
hmm thats stinks, are all pcms (99-02) like this with three bar.
is it possible to install using 1 bar RTT, adjusting my idle with RTT (since i have some 96lb injectors with an impedance...
thats what i wanted to hear thanks.
remove the maf, set the fail code to 0, then have no error reported right?
when setting up my 3 bar tune do i have to turn off all the MAF codes and set the MAF fail frequency.
thanks
does this mean that i dont have RTT on my 3 bar
does the 3 bar have RTT
before i applied my license on my 99 transam
i saw
1 bar RTT
2 bar Rtt
3 bar
(notice three bar didnt have rtt behind it)
i havent tried the RTT yet as im working on...
if i wanted to set one of my outputs as a shift light is this how i would do it on the output side?
you mean this table thats like that on the default setting (histogram table 7)?
is this all i need to set up then?
ok thanks, can anyone tell me how to set that up
is there a help file or writeup, i havent found it yet.
nobody can help aye?
tired adding the lc1 pid and it didnt work.
the guys who i borrowed didnt even add that PID
just plugged in and went.
I have an LC1
and HPT serial EIO
yesterday was my first time hooking it up as i finally got my wideband installed.
HPT would say that the historagram was not supported,
i left the histogram the...
ya ussally on second try i can open it, but i cant flash my PCM.
gonna
thats where i downloaded it before i think, but ill try it.
well keith gave me a new update, im hoping that will work, if not i guess my only option is to try and install XP, but im not to sure my...
well i installed IE 6.0, the dot net frame work but cannot open up hpt, sometimes i get lucky and it opens up, i am not able to flash my pcm do to an license error
i get these when i try to open....
windows ME, i didnt think anyone was running that anymore, serisouly would get rid of that.
ya i think my problem is it has an old version of IE, just downloaded version 6 so hopefully that will fix it.
now why couldnt i get the 1.1 framwork to install?
its 98 SE
im having problems installing it and the 1.1 net framework on 98?