Search:

So, I've never delved into any portion of ECU swapping of any kind.
Friend has a '07 Hybrid. Which of course the hybrid system died on a very low mileage truck. Swapped over needed components. ...

tlavoie. Look for small vac leaks.

Turns out I think the "blow-out" or whatever might be a cut when exceeding the MAP sensor. So back to, needing the MAP sensor calibration ability to tune, again.
I was running .711mm Gap

So, I found a very minor leak, and made some more changes to the intake.
Brought me into more normal ranges. Not great, but, pretty respectable.

CSSOB, I assume my coils are dying, but once I...

Thanks.
Again, I'm completely aware of standard testing methods, versus application. When to use something as a basis and when to deviate based on knowns.
So, I am using the stock MAF housing with...

Yes the vehicle has very fast acting wideband actually.
Ok, I read many things that stated you shouldn't/couldn't use MAF volts, which I thought was weird. But good to know I can use the standard...

Cobalt. Thanks man.
Couple of things.
The Torque to Load table doesn't limit me to a value of 255, It's set (Torque % request) X (RPM) And I think I can go to like 1500 some odd for the cell...

Like, for instance we don't have a frequency correction curve.

Thanks friend.
You should pull up a Turbo X tune from the repository... We're working with extreme bare bones... Seriously go check it out.
Good tip on the delay, which delay are you talking about...

Also me. ^ Help us Bill :)

I am in the middle of tuning my large turbo =, Turbo X Some of you might know me from FB groups.
I would be grateful to Bill or anyone else that would be willing to put some much needed R&D time...

Now, I might be wrong, but the strategy makes sense from my logs of the vehicle in factory form.
Seems at low loads at any rpm there is a positive value.
86307
If you look at all 4 strokes in...

I've not ever seen anyone tune any cams on any HFV6 to improve power up top, not in the U.S.
I've seen many people try, just I've never seen anyone make any more power up top. I'd be interested in...