Thanks.
How is it down there in the States? Just walk into any computer store and buy a piece of air straightener?
Under 100 bucks? Wow. Ain't gonna happen up here.
Type: Posts; User: 123pugsy
Thanks.
How is it down there in the States? Just walk into any computer store and buy a piece of air straightener?
Under 100 bucks? Wow. Ain't gonna happen up here.
Thanks.
That's a nice one.
Thanks.
I got the welder.
Thanks.
Too poor to spend 4 bills for the complete unit. It's double the cost up here, north of the border. I'm sure I can make up the same thing.
Does the one you linked have an air straightener...
Thanks.
These both come with just the card I see.
That's checking Rock Auto's site for Corvettes with the LS3 and LS7.
I'm working on some intake tube plumbing for my BBC 496 stroker. My throttle body is 90 mm and accepts a 4" size inlet tube.
I need a MAF sensor to finish the plumbing.
My PCM is an Express Van...
I cannot open a tune other than what's in my computer's files.
I go to defaults and for .hpt files, it tells me there is no installed app in my computer.
I updated to latest version and still...
How you enjoying the learning curve?
Be careful with spark advance if you change the tune. I developed piston slap after going a bit too extreme.
Or perhaps the 5.3 gets piston slap commonly?...
My 5.3 (DBW) 2004 is stalling out in the last two days on start up and once after driving a few minutes.
I noticed my wide band reading 10:1.
I scanned this morning until it stalled. Fuel trims...
I know this is not supported, so just want to post the problem and see what smarter minds here can figure out.
About 6 weeks ago, driving on the highway, an exhaust pipe broke off and I had to...
I guess I'll have to answer my own question/issue.
I found a thread from a couple years back about the same thing.
...
WT? :confused:
I just noticed the TCC shows applied in 1st as soon as I take off.
Does the scanner just say applied even if it it's not?
Thanks.
Will check it out.
Thanks. My dyno program comes out at 375 ft lbs and 359 HP.
How about the torque management. What does that actually do?
Thanks. I find it can't even spin the tires. There is a lot of power there, but won't cut loose. What can be done for that?
The car is 3500 LBS with 3.73:1 posi.
It's taken awhile, but I have my fuel trims looking pretty good.
What would be the next step?
No opinions on the logs?
No worries.......what's the next step? VE and MAF finished.
I've done a bunch of cruising and playing and doing things wrong.
I finally got it so it's not running lean. STFT's are slightly rich. I've got a wide band hooked up but I somehow lost it, it's...
Thanks.
I wouldn't mind seeing the tune.
Thanks. I'll flash it tonight and go for a cruise.
Thanks...I just looked and this was on a 98-02 FBody in the video.
I have them both at 284. Correct? Min and Max ECT LTFT's
Just NB tuning at present.
I watched the MAF video and the fella says to disable LTFT's but I don't have a "disable" available. ????
Thanks Guys.
I gots some homework to do.................
Thanks.
I don't like throwing parts around.
Now I just need to figure out HOW to tune the MAF.....
(complete newb)
I got my LTFT's set pretty good in SD. When I reinstated MAF, the numbers were way high again, running lean. I found an air leak in my cobbled up intake tube so I made up an aluminum tube and no more...