trust me i find it the hard way its so diferent lol, hey why everybody tune the maf with STFT+LTFT is better for some reason than wideband? whats LWFM?
Type: Posts; User: RML_s13
trust me i find it the hard way its so diferent lol, hey why everybody tune the maf with STFT+LTFT is better for some reason than wideband? whats LWFM?
thank you for the info, yes my wideband is plugged in the datalog, and it has de option to lambda, looks like more easier than i thought, i just have one question, the base fuel table is the same...
i looked in the stikys and the forum and i didnt find any way to log the Maf err like GM does, is there a way to do it? want to tune the maf with a wideband and all i find is with STFT... any help is...
its a 2016 hellcat engine with 2016 hellcat ecm, dont have any datalog but i just seen just making low boost, thats the actual issue, i mannaged to change the afr via VE with wideband cause dont even...
hi im working in a grand cherokee with a hellcat engine swap, but my main issue i cant handle to build more boost than 3-4 psi so im asking for a help to raise the boost atleast to 7-8 psi via bypass...
thank you both, ill try that and came back with updates
im having troube with the shift points, im setting 6300 rpm, and speed to 36 1>2, but shifts till 6700 cutoff, i cant figure it out what is causing this, can anyone check my tune file and see whats...
</3
i always thought had to write entire on those pcms *♂️
☹️ help!
i think your problem is wiring related, please check B+ pins(orange cables) for the ecu are B+ and not IGN+, a days back had an issue with a friend that had that pins with the ign and i could never...
i just swaped an lq4 into my 2007 colorado everything in the dash works just perfect, except for the speedo i spent two nights researching how to switch the speedometer output to serial data but i...
did you need the accesory 12v key hot?
i already delete vats and read entire but the truck doesnt get spark and the fuel relay isnt clicking also the throttle body doesnt respond to the pedal, dont even clicks the relay when the key is...
i believe this part number are 50lbs at 4bar, im trying to get it working im so frustrated
its a return less system, its a 2009 silverado 5.3, so if i have returnless without vac referenced regulator, the file you upload is correct for my truck?
i just installed these injectors but i cant get running the engine please just confirm if i have the crrect settings to this injectors
12613412 42lb inj at 3 bar
80792
Just want if anyone could please just confirm if this stock FILE are from this injectors, its suppose to came from the 6.0 liter silverado 2500HD, i need the flowrate and offset to can start the...
i friend install a new whipple in his truck but order the tuner kit, but didnt came with any info about injectors at all, i remove the injectors and find was the part #12613412 look at internet and...
please help!
ill attach a fuel pressure gauge to see how its working at part throttle and WOT
Thanks bro for the help, ill try this IFR and thats the factory IFR from the stock ECM, im still using stock injector from nbs.
im running a redline cai, i will try without the air filter, so with that fuel rail returnless style and the fuel filter from corvette my IFR are good?
no cats, muffler at the middle of the truck
im using an nnbs intake in a 01, i use nnbs fuel rail and c5 corvette fuel filter because the rails was returnless, so how would me ny ifr?
can be cause the drop from a leak?