So what if I left the Tcm there to read the transfer case vss to translate to the pcm the speed which then goes to the cluster ?
Type: Posts; User: etizz
So what if I left the Tcm there to read the transfer case vss to translate to the pcm the speed which then goes to the cluster ?
still curious about this. been gathering parts for a manual swap. from what i understand my 4485 transfer case has a speed sensor, transmission i want to use does not it is a nv3500.
my concerns...
So heres what i have.
- 2008 escalade chassis with ecm, bcm ,column with key, instrument cluster, fuseboxs. swapped with an old car body
i've driven this car a few miles as it sits but nothing...
heres a video of its second startup, 1st one was a surprise lol. the site cutoff the length of it I think , it was about a minute long of it idling the whole time at about 850 once it came down. ...
So quick update , the car runs ! My random coil not firing was the crank sensor distance to the reluctor , some how had shifted away when I welded it up for good by a little. Once i figured that out...
so my next plan is to go ahead and try a 0411 pcm, I'm picking one up from the junkyard today. everything was working and almost started even with the old wheel it just grenaded the pcms ability to...
Ok I've fabbed my 24x reluctor and I'm only seeing spark on 1 cyl again , nothing I can do in the tune etc can bring it back . I'm lost as to why this keeps happening .any clue ?
ok quick update. i've gotten rid of my lingenfelter box and the 58x wheel. i now have a 24x reluctor and i am seeing rpm when cranking, i sitll need to fabricate the new crank sensor bracket but for...
so did you fix that in your tune posted? I thought I was in SD that would explain some things too lol. I am running a cam signal I modified somethings to give me a 1x cam signal, I honestly don't...
which things that I disabled would put it into reduced power mode? I tried a friends pcm that wasn't unlocked and all 4 coils were firing. so I unlocked that one too thinking my pcm was bad lol,...
so this is off the wall but i have p59 green blue, dbw, ls pcm trying to control a non gm 4cyl. Ive wired it/have all sensors etc in place just like an ls1. i have known good coils/ injectors. i...
I appreciate the response but that would require completely changing everything ive done. I understand that crate LSA packages run the E67 PCM. but for me that would entail pulling the engine and...
Hey guys. I've got a 89 Rx-7 with a stock block LS1 and a LSA blower on top. It has LSA injectors, LS9 cam, stock compression (10ish:1), running the factory 3 bar map sensor. I'm running a 0411...