Search:

first off even small blips of KR is bad, for the engine and for power.

Question:
i saw that some one said use multiply % half. and it's in russ k's maf tunning write up. what dose that mean. i...

ok i got it working. i had a DTC still not enable for the egr pintail position. but it's fixed and running. Man i have a lot of work todo. the Afr IS ALL fubar'ed up. in boost i saw 9.5:1 . so i'll...

i taped in to the egr side. i'm now scanning for egr voltage. but still nothing. my DTC's are set to ses enable with 3 no error reporting i guess i should go mess with those .

i don't have a egr. it's been off for about 2 years now. do i need to have it there for the reference and ground maybe? i'm getting voltage from the LC-1 but i can't read it in HPtuners. it always...

so i hooked up the WB02 and it doesn't work. on the table it keeps reading 7.35 which would mean that there is 0 volts going to the egr. i hooked up out put from the LC-1 to the brown wire. that...

hey my egr harness has 2 brown 2 grey and a red wire. i know it's supposed to be the brown wire to hook up to the egr signal but which one? dose it just split to make the connection double secure or...

i know this is old but the paper that came with my LC-1 has the info needed for the PID

0 volts= 7.35 AFR
5 volts =22.39 AFR
so range = 15.04

so you get
PID.2811/(5/15.04)+7.35

here guys sorry i haven't been on here in a wile summer school sucks.

here is my last scan and htp file and i did desensitize the knock sensors by about half.

i have O2 readings?

ok as i look threw all of the scans i have i notice that i get kr most of the time in the same spot. it's between 65-74mph and 3500-4000 rpm. i'll upload a scan from yesterday that has kr all over...

i had the same parse log problem for awhile. i have to go to open config file in the scanner to get it to open. so as far as i know it's your config Russ. i recived the maf with my gen V blower so...

Russ
I'm using your config file. when i open it i have TPS % i currently don't have a Wide band. i know i need one but I'm just trying to get it to run better and be semi reliable. not trying to...

ok i did a little bit of tweaking in the maf but i didn't seem to help
first is before the tweak

here is the latest scan i have it's old but i just got evry thing working....i hope

the mini afc is a little box that connects inline with the maf and alows for maff tunning without access to the pcm. i have it set to do nothing now that i have hp tunners. i have a L67 with a gen V...

ok heres what i got
pcm set up here
scan file here

any help is appreciated

i got it to work i changed my i pods drive from f to g and it worked. idk why

i'm haveing this same problem. i cant open files that i saved 5 mins before

ok i received hp tuners for Christmas. i have been running a mini afc to calibrate for the LQ4 i installed with the gen 5, but i went ahead and put the lq4 numbers in the pcm leaving the last 4 out....

tried that ^^^^ didn't work i guess i call support tomorrow

i got hpt for Christmas but every time i try to install i get a error 1327 invalid drive G:/.and the installer stops. i have tried restarting the computer but i have no clue what to do. i know it's...