I have windows 7. How do i get it to open in hptuners? I cant get past the compressed zip file.
Type: Posts; User: speedy
I have windows 7. How do i get it to open in hptuners? I cant get past the compressed zip file.
I can read them on the other displays. I might need to make a custom one somehow.
Im starting to get back in tuning. I have a 2009 silverado LMG 5.3. I cant read the STFT in the Histogram Display. I keep getting "This Histogram is not supported with the current loaded parameters."...
I got it working now! :drivin: I didnt have a driver installed right or something.
Thanks
Still cant get it to connect with the new laptop. It will work with my old laptop.
I have a brand new dell inspiron E1505 and i cant get the interface cable to connect to the PCM.:rant: What could be causing that? I have the USB drivers installed.
How could i miss that. :banghead:
Thanks!
How many credits do i need to add a 05 or 06 silverado 5.3 to my existing cable?
I just hooked up the LM-1 to the MPVI PRO and i'm getting different readings. While the LM-1 is reading 14.7 at idle HP Tuners is reading 10.8-11.0. How do i get Hp tuners to read the same as the...
:drivin:
Never mind, I got it working now.:doh: :drivin:
I got everything installed, but now it says "No License Found".
Thanks for the help.
How can i install the MPVI pro without a CD. I just received my upgraded interface cable today. I got a Email from Keith saying they were out of CD's, but there wasn't any instructions saying how to...
Are you using efans? If so, make sure there turning on. You need airflow over the condenser for it to cool properly..
I do my own tuning..:drivin:
ttt
Thanks, that fixed the problem..:drivin:
What could be causing this code "PO141-HO2S(Heater Performance Bank 1 sensor 2)(PO141-HO2S(Heater Performance Bank 2 sensor 2)? It only started appearing after i installed my LT's with off road...
Humm, I haven't never messed with spark dwell before... Maybe i should give it a try..
I installed a cam last week "cammotion 223/218 .576/.564 115+4" and i almost got it tuned.. It idles fine when i crank it up but, when i come to a stop from cruising it wants to stall.. I got my idle...
This is what shows up when i try to download the update.. what am i doing wrong.. :banghead:
http://img.photobucket.com/albums/v428/speedy02/untitled.jpg
Oops,i ment to say 0.02.. :banghead:I dont have any traction control..
I added 1.02 across the board on the "Burst KR enable Delta Cyl air"..And This is the log from it..
http://img.photobucket.com/albums/v428/speedy02/log10.jpg
I found that table in "Burst Knock Retard"...I thank this might be the table your looking for.>
http://img.photobucket.com/albums/v428/speedy02/tabelBKR.jpg