I could use help also. I can get the E39a to run well but limited to 5300rpm because throttle closes down to 36%. E39 goes to 7150rpm but throttle has a high of 68% and closes to 36% on it's own...
Type: Posts; User: oldbiff
I could use help also. I can get the E39a to run well but limited to 5300rpm because throttle closes down to 36%. E39 goes to 7150rpm but throttle has a high of 68% and closes to 36% on it's own...
I would if I knew how
Peak Engine Torque 307 lb?ft
Knock Retard 0.5 ?
Accelerator Position D (SAE) 84.3 %
Throttle Position (SAE) 83.9 %
Commanded Throttle Actuator (SAE) 100.0 %
My accelerator reads 84% but ECM commands 100% throttle.
Is there a tuner out there that can make it do what I want ?
I've noticed that throttle goes to 100% after 5000 rpm
anything?
Throttle only goes to 71%
Anybody get this figured out?
How can I make the throttle follow the pedal 1 to 1? By that I mean when I floor it I want the tb to open 100%. I put an LFX w/6 speed manual in a Crossfire. I have E39 and E39a ECM's. Running the...
I'm using HPTuners Vats delete. I run the engine as stand alone with no inputs. It now goes to redline(7,150) I have an E39 that logs constant 0 mph but I could not get past 5,300 rpm. Tried the same...
Never mind
Yep, X2 pin 8. I'm fighting the 5300 rpm limit. I'm not using the clutch switch, could that be the reason? It has to be some setting but I haven't found it. Throttle will not open all the way.
Suffering the same issues. Any luck ?
I would like to know how you got the rev limit changed. I have big bangs in exhaust so I will be checking cam sensor pins.
If you haven't figured it out yet you can have Dave flash your ecm http://www.performanceautowerks.com/ I gave up and got a flash from him and it works great, helpful guy. Does a lot of these. If you...
Doing the same. Did that do it ?
I'm searching too. I have the turbo sky. From what I have found so far is we need an e67 ecm and the harness from something with the le5 engine. from there I don't know if some wires need to be moved...