probably is late..but I can
Type: Posts; User: Yeti ChipTuning
probably is late..but I can
how you can connect to the ecu without obd port ?can some one share the pin-out
can you attach the stock file ?
rise a 7000 rpm the tcm limit and the rpm limit in EOT ECT , set the rpm limp of 200 rpm and you got it
HaasExp you have tuned the engine ?
yes sorry but I have found this info really helpfull and I'm going out of the thread
at the moment nope only with winols an my finger
we must wait , I have send the solution at the tech ,or you can set the sitch at 16 absolute value the switch with winols
this is an awesome description , than the min and max overlap work even in the Nag1 right ?, but you speak about overlap time , and overlap torque right ? if i lower the low time and torque ,I allow...
hi , i'm new to Chrysler Transmission but this parameter it intrigued me, can someone explayn what really do ?
thank you
i have found the issue and have emailed the solution at the tech , hope is corrected in few time
Jim P thank you so much for all this info , really help
ok set at 16 bit absolute value , I have disabled the downshift at wot with autostick , How i can open a ticket for correct this in vcm suite ?
you loose engine brake
never tryed to apply over the tcm rpm limit and release at low rpm ?
ok , I have had a time to play , but vcm editor fail in some switch , example in Shift tq adapt downshift and upshift and tq red enable disable dwn /up shift , fortunally I use WinOls too and i have...
torque reduction yes , I know , but the torque adapt enable /disable is in the shift properties , i do a try disabling it in downshift and see what happen
question , the Shift Tq adapt 2-1 and so on , is the torque loss for command the down shift from 2nd to 1st gear ?
rised the tcm rpm limit over engine rpm limit , autostick at wot ,set enbaled, disabled the performance driving and fine work on part throttle shift table for performance ,plus TCC apply and relase
for what i have undrestand the S-C and M is correlated than in M with autostick when I stop the car S or C is autoengaged or I'm wrong ?
Hi , I have tryed some trick and I'm able to use the autostick without auto up/down shift and use like a manual stick, but...
if i'm stop the car the transmission downshift , example I'm in 3rd gear...
you haveread from obd or pinout ? I'm search the pinout for this tcm
thank you
is the Torque monitoring error , maybe is a tuned engine ?
hi , as written in the title ,I need to know the pinout connection for this TCM , I need to work on the bench
any help is really appreciated
Marco :hi:
Hello To all , I'm Marco from Italy ,hope this community can help me to understand how best to use this tool
cheers