Seems like different rigs need different placement. If a ratio change does not help then adjusting the spacing can help. Some folks have some pretty sophisticated metering for the application to...
Type: Posts; User: Saxxon68
Seems like different rigs need different placement. If a ratio change does not help then adjusting the spacing can help. Some folks have some pretty sophisticated metering for the application to...
Hi folks, many of you have purchased honeycomb screens from me, and until now seems I have understood the LS1 title.
In an Fbody an LS1 seems to be 86mm, and in a Corvette it is 100mm. This is...
http://www.saxonpc.com/100mm-cells-for-100.html
1/8" aluminum cells are in and this material is Pimp :pray:. Ranging from 4:1 to 8:1 ratios. The material is quite a bit more expensvie than the...
Seems like it depends on the application. Most folks are happy with 5:1 ratio. We will have Aluminum 1/8" cells available in November. In ratios between 4:1 and 8:1. If u want to upgrade to the 1/8"...
So I could not have you guys running these without giving it a go myself. My '98 firebird looks like it will be a few hours work to install, so I opened the hood of my 1994 Plymouth Grand Voyager and...
For the tax day we all love I have made the website saxonpc.com free shipping for all items. Although you guys really only want the stuff for cars. :worship:
If someone has a speedlight flash...
Sounds good. PM me your shipping address RWTD. I have a few questions too for you guys using these:
Are you running these full time in your rigs?
Would this be applicable and beneficial to a...
Someone in the US want to volunteer to try some 1" thick plastic material that is 1/8" cells? Reply to this message of you can install this right away and get some results. It is 8:1 ratio. ...
Looking at the charts you posted and not very used to seeing this. What type of CFM is an automotive intake drawing at idle and say 2k RPM? If you have a volume per minute I can probably figure it...
I think more than the perfect cell size it best to ascertain the best ratio for you guys. Then I can use that ratio in 1/8" cells if needed. I got some samples of the 1/8" aluminum but it is only...
I pick off any obvious stray pieces, but don't obsess about it like if I was putting it in my car. Not sure what it a slice of it would do in my '98 Firebird V6. Which is probably LP Tuned.
I...
Ok I sent a PM to 4 members. Now this material is washed after being cut, but not pressure washed. (the plastic is pressure washed) The foil gauge is .001 inches and cells are cut to partial cells...
I will have some samples of 1/8" cells by the weekend. Can I get a few US or CA residents to sign up for a free sample in return for feedback of the 1/8" cells? Like the first 4 folks who will reply...
I will work on getting some 1/8" cells, the smallest made, the wind tunnel website does menton 6:1 or 8:1 ratio, but that may be a higher ratio than is needed for the 100mm size. What do you think...
Hi this is Jason from saxonpc.com I have been reading the thread. And feeling embarrassed of my V6 here. The best page I have found to read about "turbulence management" was this one from Peter...