Okay, thanks. That?s what I was thinking just wanted to make sure.
Type: Posts; User: ramdart74
Okay, thanks. That?s what I was thinking just wanted to make sure.
I have a 6.4, headers, high flow cats, edelbrock supercharger, forged pistons and cam. At the beginning of summer i installed FIC 1000 injectors. The car runs good, but just trying to dial in the VE...
Would adjusting fueling with NN off be the same, LTFT/STFT v fuel mass? or should I be doing the VE tables, just change injectors want to much sure i am going to do it the right way. I started with...
I am thinking about upgrading. Are we able to add the accelerometers to a channel to log gforces or something?
I am trying to do the same thing. I think the aggression plays into it. Right now I have it so it is only using shift map 7. In a straight line it shift when I want it to. But when I turn left or...
AEM boost gauge connected to one of the data line using pro link.
Here is what I am not getting. Two logs back to back, after stopping for coffee, Long + short seems very different i dont understand why.
121907
121908
here is a log i just did with no changes made.121899
They were, I?m working on it. I put in bigger injectors. It seems like in the morning I get big swings, and in the afternoon it?s closer. The guy that tuned it was supposed to help me with the...
tune and log
121849
121850
I?m not getting into PE though. This is at normal cruising.
There is a transient tab. Just not sure on which table to make adjustments to. Not going into boost. It?s just with little throttle movements, general driving. I?ll get a log.
First, while cruising, when I increase throttle A/F spikes pretty lean for a second. Fuel trims are within 5%. Is there anything I can adjust?
Second question, is there anything in a tune that...
Logging ltft and stft. I also have a wide band, but I think I got it. I think I had a mistake with the injector tables. I was getting an error message on the fuel mass axis. When I changed the cell...
Its 39, I attached a tune, and a log of it
119104
119105
Thank, looking at logs before the new injectors, ltft+stft was 10% and lower, So all I did will so far with injector data was put FIC data in. What table is the low slope in? I am not seeing anything...
I have a 16 charger scat pack. With a edelbrock supercharger, long tube headers, high flow cats, forged pistons, and a comp cams custom cam. I just installed FIC 1000cc injectors. I am tuning for the...
Thanks. NN is off and VVT has been disabled.
I just installed the same injectors, 6.4 cammed, headers and supercharger. It fired right up, and seems to idle pretty good. I have NN off. Should I be tuning the VE tables first or the injector pw...
I have the MPVI2 and I am looking at get a couple AEM gauges. The prolink says 1x can bus. So does that mean I can only connect one gauge to the can bus to log or can I connect more then one if I was...
Thanks.
By mistake I changed the units in the pedal % table. I tried to cycle through them and the units disappear. Any idea on how to get them back?114108
In this post some had the same issue and it seem like it was removed on purpose.
https://forum.hptuners.com/showthread.php?92584-VCM-Suite-v4-10-Now-Available!
Did that and still nothing. Just tried the lastest stable one. I thought I read it was removed like the 02 enable/disable switch.
4.9.873 beta. Is there a fix?