3.x must be very old software. i will upgrade then. i am sure you all said somewhere one needs to upgrade. thanks.
Type: Posts; User: jegten
3.x must be very old software. i will upgrade then. i am sure you all said somewhere one needs to upgrade. thanks.
What "first step"?
as i mentioned before, from the first page here in this thread. See boldfaced and underlined-
"Upgrade Process
1.Backup your MPVI Pro or Standard interface licenses online by...
I am getting ready to upgrade from my MPVI1 Pro to MPVI2 Pro, and have added my interface to my account/my device. it shows my s/n, license info and credits.
now, i am trying the first step listed...
I could be mistaken. My 2004 GTO has the ABS fault and SES, and when I scan for DTCs, it does not show anything ABS related. It'd be nice if it did, though :D
bringing this back.
I set both limits, the IPW and the DIP, to .350, and left the SPA and the Short Pulse Limit to stock values. When I scan, IPW is reading 1.7 to 2.0.
Do I need to change the...
I sent an email to support. Hoping for the best. Being away from the vehicle certainly makes things difficult.
Anyone have experience on the bold faced?
I copied all the tables onto an Excel spreadsheet and from there, i copied them on the oem file that works. Tested the unmodded file and the car started....
Thanks for the detail response J! I appreciate it.
It sounds like that's what I am going to have to do. My car is heavily modified though, lol, so it will be a chore. This is going to take longer...
Thanks for the input.
For my own sanity, did you do segment swaps? as in importing the differences?
or did you do a compare file and copy and pasted just the tables?
Again, thanks!!!
Hey Michael, thanks for your input.
I thought the same, that's why I did oem file with segments swapped, then I did oem file with only engine and transmission segments swapped. and, still this were...
Thanks for the input.
I should have said I had the ECM programmed with my VIN.
Also, I did try with and without VATS. It is puzzling.
And yes, I have worked on conversions and by simply...
Good evening all.
My 2004 GTO has been running great until recently, when after starting it, it began to die after 5 secs or as if the PIM and ECM were not linked.
The mods are in my sig.
...
Thanks!! :o)
Hi jtrosky, thank you for the reply. That would be great! I appreciate it.
I have my 2.24 update still saved in my HPTuners updates folder, though, it doesn't tell which version it is. (I right...
Thanks for the reply.
Well, I just upgraded to 3.0, and I am in the middle of the learning curve, doing research, and got pretty busy with vehicles. So, I though I keep 2.24 in one laptop and 3.0...
"only 2.24.1170 and 2.24.1172 will work"
Does anyone know what date were any of these updates released?
I save my updates, and the date on the 2.24 update I have is 8/30/13. Though, it does not...
Thanks! I just recently moved to version 3.0, and have a vehicle with an enhancement applied already. I take it I would have to figure out how to get a "stock file" flashed into this vehicle to be...
Dumb question-since you have to restart with an 'un-enhanced' file, how do we get access to the enhancement to apply?
thank you so much for the great help! :D
i will now
sorry for the delayed response.
i just tried it, and it didn't work. i also tried loading vehicle defaults, and everything loaded except the PW Avg Bank 1.
thanks!
thanks, i'll give that a shot.
thanks Bill for the response!
'my vehicles' folder contains 8 os. is mine the one that matches the "Converted from" in the VCM Editor-Operating System?
in the VCM Scanner, i was cleaning up my main table to lower my frames. i deleted LTFT both banks, and noticed that INJ Pulse Width Avg Bank 1 became <unsupported parameter>
i right clicked to add...
...please delete this thread. thanks.