can being too rich(~11.0) really cause knock?
Type: Posts; User: walterd
can being too rich(~11.0) really cause knock?
Thanks guys, appreciate the advice, I am surprised I was getting this knock at the timing I had 22.98 - IAT correction = 17 and getting knock. I was hoping it was false knock but I will try pulling...
So I reviewed the log I am confused why I got some knock at the end of 4th. Anyone willing to offer a suggestion on how to narrow this down? The knock sensors are still stock values and I do have...
Chris, does the fuel pressure max torque apply to GTO's as well? Does this max torque setting really lower the amount of torque at the wheels? I have had mine at 640 but went back to 350(stock) just...
Seems like this was because of the COT being enabled and DFCO, I turned these back off and the log looks much better.
Greetings,
I have been logging with an LC-1 and trying to follow the help(Speed density tuning with a wideband) and when I turned back on the closed loop, DFCO, and LTFT I saw a huge difference...
happened to me too, can't wait to get it back
THanks guys, I am going to check my analog outputs with a voltmeter today, dam, I really don't want to pull this whole thing out. Next time, I am not going to route all the wires until I know this...
Greetings,
I just installed a LC-1 connected to USB HPTuners EIO and it worked great for a couple of days but now it just reads 7.4 constantly and I have done a free air calibration. I did the...
If you program the lc1 for 10-18 afr at 0-5v and set it for 1/6th report rate should you do another free air calibration?
Thanks!
Thanks!!! I did have that done(went back to the starterSD), I found out the AFR error was because I modified the table incorrectly. When I went back to the default config I was in good shape. I...
On all cells? Anyone care to help me out with the little knock retard? I am trying to finish the SD tuning as described in the help section but the arf correction worries me that I would be making...
Thanks Jimmy!! I really appreciate the suggestions, I think I got my knock resolved.
Hey All,
I have been working on a speed density tune(Ls1, 04 GTO) and I have been making some adjustments to the PE and low octane spark table and I was wondering if anyone has any suggestions and...