Well I tried modifying my VE table with the AFR error listed in the scan above. In thg higher RPM/MAP levels I increased VE on the order of 10%. reflashed and went for a drive to scan again, and I...
Type: Posts; User: UMD_Jesse
Well I tried modifying my VE table with the AFR error listed in the scan above. In thg higher RPM/MAP levels I increased VE on the order of 10%. reflashed and went for a drive to scan again, and I...
well I guess that makes sense. Any idea why my afrs are off? Usually what I see when scanning is my wb nicely floating around 14.7 when cruising but then jumping rich to the 12.8 range when i...
Well, I thought I had my tune squared away. I wrote my modified VE and MAF tables back to my stock tune, along with my new commanded pe enrichment, etc. Well everything looks good except when I...
I noticed the online version of the "VCM Suite Online Help" has more up to date info than help files installed with my program. Can a new *.chm file be downloaded somewhere? It would sure come in...
anybody?
Ok, so I tuned my vehicle changing the MAF curve using the various tutoriasls that are out there. The car has never run better since my headers were put in, but my gas mileage sucks and now Im...
Not yet, I was trying to figure out WHICH cylinders were misfiring first. My guess was 1 and 3, but Im not sure Im reading the logs correctly and wanted someone to confirm.
Looks like Im getting misfire on 1 and 3. Can someone confirm Im reading this correctly
anyone?
ttttt
Ok,
Pulled into a gas station, everything, fine, pulled out one day and engine runs like crap. Stock LS1 motor with long tubes and cold air and rear O2 deletes. Could one of you guys please look...
nobody knows what "calculated tire" is
ttt....yeah....anybody know what the "calculated Tire" box means?
yeah....what does the "calculated Tire" box means?
ttttttttt
ttttttttt
ttttttt
Can you provide an example of the manual scale? To how many decimal places must it be accurate? I cannot figure out the calc tire value....it appears to be TIRE SIZE x GEAR RATIO multiplied by some...
Ok, so if I scale the data properly, with the ability to enter tire size reappear?
Thanks for the reply.....but how do I fix the "error" in the tire size as shown in the attached file?
ttttttttt
I changed my t56 tranny to a viper output shaft with a 10t reluctor. When changing the setting I get the same "error" in the tire size every one else does. I've gone over the math, used the tire size...
I am having this exact same issue. I have seen multiple threads on here about this issue but no one has a fix. Anyone have any ideas? I changed my t56 tranny to a viper output shaft with a 10t...
Just an update in case anyone was interested....I figured out the MAF/AFR error histogram and I needed to adjust my MAF curve more aggressively. Im now much closer to my targeted AFR. Still needs a...
ttt