Search:

curious if anyone has learned more about the ve corrections? due to them being temperature based(and baro) I would expect they could really mess with you when tuning SD only at lower temps from...

thanks.

I haven't been back to visit the car but did confirm it won't run a stock truck TB either- so I know its tune related.

The OS is shared with an 08 LS3 so I'm sure the OS will...

appreciate your thoughts.

floor is still open for anyone with helpful insight.

also curious if anyone from the HPT crew can tell me what relationship or break point the 'MCP TPS Limit' PID...

Gents,

Working on a E38 LY6. LS3 throttle body. VVT in-tact, using a 2008 burb base file. Corvette pedal, wiring appears to be ok.

As the story goes, the engine ran fine with another 5.3...

current tune file attached. still harsh downshifts. 3-2 is semi. 2-1 is semi. 3-1 is rough.

its actually the 3-1 shift that is super harsh. playing with it now, trying some things. will post the tune files in a bit.

Yes coasting to a stop 2-1 downshift. It's the same hard downshift as a fast stop, or a slow gradual coast down. When it grabs second you sit up in the seat a little and when it grabs first it's a...

Gents,

Have a swap car with an extremely hard/harsh 2-1 shift. I finished up tuning the MAF on the completely stock L83/E92 with the 6L80/T43. Only tune modifications are normal standalone...

when the patch is applied, how is the wiring done? is the starter wired directly to the key? and the ecm just sees starter rpm and knows to kick off the injectors/coils?

Gents,

Looking to help a friend out. He has a 2017 5.2L voodoo pull out and wants to use the 6R80 transmission. There is no control pack available for the voodoo.

Could this be as easy as...

more searching- looks like I have some re-wiring to do.

although it does say the green/yellow wire can run a relay- where mine is not strong enough.
...

exactly how I have it wired...

http://westcoastmustangs.com/temp/return_style_conversion_1.jpg

more info-

I probed around with a DMM and figured out I am getting +12V off the signal wire from the ECU. The problem is this voltage is dropping to around .2volts when the relay coil is in...

snap.

Well I'm using the program on a dell laptop- 1920x1080.


You got me thinking though- checked the display and it was set to 125% magnification by default. I dropped it back to 100%...

couple pictures attached.

53908
53909
53910

Feeling like an idoit- I am going through my first Ford tune within the vcm editor for the first time.

All of the 3d tables I open are unreadable as the text is all squished up. I dont see how...

All,

Looking to swap to a return style fuel pump on a 2005 PI.

I can't get the fuel pump to prime before starting- but I do know if I short out the pump the engine will run.

I am sure I...

Hi all,

I come from a GM LS back round and am fairly well versed in the 512/1mb ecus. Typically I stay with what I know- but I have a friend who is into building Fords.

Anyways- he is...