I have 2014 Silverado 4x4 with a lift and 35 inch tires that came into the dealership for a surge.
The dealership changed the ECM and the surge went away however the ABS/Traction control...
Type: Posts; User: TurboCamaro
I have 2014 Silverado 4x4 with a lift and 35 inch tires that came into the dealership for a surge.
The dealership changed the ECM and the surge went away however the ABS/Traction control...
Is the "plotted indicated torque" you are logging "Engine Indicated Torque Reference"?
I talked to Tech Support to get Indicated Torque and Driver Demand added and now have Driver Demand Engine...
Thanks Sultan
The balance on the trims seems OK. What would you suggest to sort it out.
This car has 2000km on it with the only modification the addition of the ProCharger.
I have a 2017 Camaro A8 with a Procharger on it. It makes good power and drives nice however there are permanent codes, P0121, P1400, P2097 P2099, showing up with Diagnostics in HP Tuners. The MIL...
Awesome.
I had understood this that the point was to be able to focus on one point.
This truck uses Mapped Point 0 under WOT so I can disable 1, 2 & 3 concentrating on 0 then populate 1, 2 & 3 from...
Thanks Devildog1325
This is 2010 6.2 in a Raptor.
Attached are a few screen shots.
67505
67506
67507
Awesome, thanks.
It is at 500hp at the tire on the dyno right now.
I need to spend a bunch of time on the Torque Management to make it drive properly. Was thinking the VCT elimination would make...
What are the experiences of CVT delete. When should it be deleted?
I have a 2010 with a single turbo at 8 lbs am thinking deleting CVT would make it easier but there is a reason for it.
Thoughts?
If OP is not normally active do you activate it and utilize it going forward. Most threads and literature I read including the cookbook talks about tuning the OP.
This patent is a great read. Thanks for sharing, Eric.
HI Eric
Thank you very much :)
I really appreciate it.
Eldon
Is it possible to add the trans shift schedules for 2010 Raptor 6.2L
2010 Raptor Auto Shift Speed Tab
67011
2011 F150 Auto Shift Speed Tab
67012
Thank you Eric for the support on this truck :)
Great idea to post here for the benefit of all! Hopefully I have summarized enough.
The truck is a 2010 Rapter with a single turbo.
I understand...
Thank you
This gives me some reassurance on the sensor threshold.
There is no meth
The AF log is unfiltered with the Autronic meter on the dyno it is stable. Although I would like to see it...
I have a 2009 Challenger on the dyno with a Kenne Belle blower and exhaust.
It is making decent power however I cannot seem to get rid of the Know Retard.
I have read all of the posts and still am...
Ryan
With supercharged 392 Challengers how far have you had to desensitize the knock sensors.
Thanks
Only the codes in the screen shot.
Thanks mxatunerjg
The MIL light is on.
took it for a quick drive, approx 5 min, and the codes as well as the MIL stayed on.
Unfortunately it was one of those with the customer in the truck doing a quick modification...
I got codes U0101, U0141, U110C, U110E & U1403 today after flashing the trans on a 13 Jeep Wrangler Rubicon. I tried clearing the codes and reflashing to no avail.
From this thread it seems that it...
63915
I am looking for a calibration for a 98 to 2000 2WD Suburban with a 7.4L and a 4L80E.
I have searched the tune repository and have only come up with 4x4 versions.
I could start from there...
I am trying to control gear (keep trans 2 or 3rd) on a 2010 Camaro A6 while scanning to do the VE table but the trans is shifting.
Is there something special to this.
Thanks
Have you made any progress with the MEFI5 (&6)
I have changed the tune a bit to delete the rear O2s.
Am I missing anything else?
Thanks.57168
Thanks :)
Thank you.
That is odd. I would have never thought DFCO but there it is by fuel then you can switch to by spark.
If switched to spark does it limit by fuel and spark or just spark. I prefer to...