vt is alot of it but, the more power you add the better its going to shift anyway. I know on my 19ss with the 10l80e you can greatly increase the vt at wot and it will shift way better but, it starts...
Type: Posts; User: 07 z71 silverado
vt is alot of it but, the more power you add the better its going to shift anyway. I know on my 19ss with the 10l80e you can greatly increase the vt at wot and it will shift way better but, it starts...
Virtual torque and keeping it in tour mode. It will cut fuel in sport or track.
Ok did some testing today and figured it out. Gained 2mph in the 1/8 and 1.5Mph in the 1/4. Pretty drastic difference in the way it shifts.
I gotcha. So are talking about virtual torque?
I have a 2019 camaro ss A10. I have full boltons with e85. I have the t87a unlocked and I have been trying to improve the shifting on it. I havent been able to get this thing to shift exactly how i...
I was tuning a 2013 caprice Ppv with a 2.3l Maggie and was trying to get it to stay locked fully on the highway. The only time I could get it to not pulse was when it was in speed density. Anybody...
Your wideband is on a 14.7 stoich Gas scale or 1.0 lambda. Your computer is commanding 14.1 e10 stoich or 1.0 lambda. So basically if you switched your aem to lambda and looked at commanded eq...
I?m guessing you were watching Jorge?s vlog. Yea when he was just Bolton with e85 he had 35 degrees of timing. I was cringing.
post tune and log if you have one. sounds like torque model needs some massaging.
I would say it?s worth it to be able to control shift points and converter lockup. You can bump up the pressure offsets and that seemed to make my wot 4-5 more consistent but, I believe that is kind...
Let me guess 4-5 shift. I have a full Bolton 19ss and I have the tcm unlocked. I made a few tweaks that seemed to make a small improvement but, There just isn?t enough tables to really do anything.
write the tcm only. uncheck the pcm/ccm and only write the tcm for some reason it can only be written by itself.
try increasing your virtual ve at wot and see if that raises max torque.
Afe Cai and 1 7/8 headers and off road x pipe.
I added timing in back in to the Hi Octane table here is the new tune. It has zero KR now with this timing. It's strange though say I add 2 more...
Hey guys this is only my second Gen V to tune so im trying to figure out the correct way to tune these headaches.
The Car is a 2017 Camaro SS A8. It does not like to rev in park/neutral extremely...
Ill try and get some logs its been raining here so it might be a day or two.
Just picked up a brand new 2011 extended cab 2wd silverado with 3.73 gears. The thing was a dog with the stock tuning. Just did minor changes that woke the truck up tremendously and still very safe....
That is my video guide. All you are doing is making the idle adjustaments more dramatic.
how can i go about tuning this car. Taking it to a dealership to get it flashed back to stock? then start from there?
im trying to tune a buddies 402 80mm turbo 04 gto. It will let me read the tune then when i try to open it gives me a error message. saying ECM definition failed to load. my serial is 1050309343
Here ya go.
Your timing is pretty high at idle I would lower it. Other than that it seems to idle very well.
Thank you, so something like this for the over/under?
My buddy is going to put a cam in his 2006 c6 ls2. He doesn't want too big of a cam so it drives nice, but really wants a choppy idle. I was looking around and people are saying you can mess with a...
they were used.