Any luck yet ?
Type: Posts; User: Lathan601
Any luck yet ?
Hey i was going to see if you can help me . I have installed VCM suite on windows 11 in parallels on m1 Mac and I can get the editor or scanner to even open up what am I doing wrong ? Thanks
@hptuners please find a way to disable flex fuel in the tundra !! Please !!
Thanks for the info
Did the relay work for you
Has anybody figured out how to disable flex fuel . My 2017 keeps reading higher ethanol percentages and I?ve only ever ran 10% ethanol at the highest. Also is there a way to perform the alcohol...
Also looking for advice on how to tune the maf . Like disabling fuel trims and dfco for eq error ratio . And what are y’all doing about the factory widebands having a limiting range when tuning in PE
Does anybody have any pointers of what I could do to get a little more out a of stock tundra ? I?m used to GM ls platforms. Thanks for any advice
Anybody have info on the correct method to read and flash a 2018 with push button start ?
I’m going to give that a try
Yeah
i think i have correctly simplified my VVT on my 2016 5.3 if anybody can chime in on this table before and after and see if i did this correctly? truck is stock, just trying to get a little more...
On my 2016 E92 I can fail it by going to engine diagnostics -airflow - and settings the MaF fail high and low frequency out of range
Thanks for the info . Could the VVT be left disconnected or would if have to have a non vvt cam installed ?
2008 Silverado 5.3/4l60e the engine had failure due to lifter eating lobe off cam . Wanting to go back with a 6.0 . Looking for any pointer as to the best year model 6.0 that would be most compatible...
I haven’t ran into those problems yet but I only went to a 33 inch tire
Yeah none of the numbers match up. It’s aggravating ! Haha
Does anybody have any info on the speedometer calibrations?
Dist
Dist-trans
These two prarameters are different in my stock calibration on my 2016 seirra 5.3 and 8l90 but i cant seem to...
How many individual vins can be licensed to 1 MPVI2 ? Do it have a max license capacity ?
look at "goat rope garage" channel on youtube. very good info on there.
I’m new to the gen v tuning as well but have you dialed in your VVE and MAF using a wideband ? Check your LTFTs, fueling could be way off .
here is what i have so far and a log. it seems like it has a lot of KR but im not used to the ecoboost platform. any info would be much appreciated.
Anybody want to share a tune file with me so I can reference it to my stock file ?
Can someone plz explain to me in the trans tune under shift scheduling how to raise the shift points. Do you have to raise both the shift rpm and the shift speed ? Do these work together? If so how...