I can change the units in Virtual Torque from NM to FT-LB. Am I missing something here?
Type: Posts; User: 02402ramair
I can change the units in Virtual Torque from NM to FT-LB. Am I missing something here?
I have e mailed logs and tune and if you read what I wrote I said I would e mail to who wants to help.
I agree something is limiting it but I have yet to see a log that does not have a delay in...
Who is the best tuner on the C7 Z06 A8 willing to help a fellow tuner? I don't mind paying for some advise, tips, tricks or whatever. My car is running good but has some issues that need to be fine...
Hey guys.
I have a C7 Z06 with heads, cam, 2650 blower, 103TB, 5" intake, low side,1 7/8 headers, Meth injection and ms109. I have a delay in the throttle I am trying to work on. I would like to...
Transgo shift kit going in to eliminate TCC PWM
I hope this will fix the issue and I would still like to know what is causing this for a future fix
I have 2.23.885 Beta. It should be the latest.
Anyone else?
TCC will lock solid with scanner
TCC will slip on light accel but PWM shows to be 99%
I can live with the decel unlock but the TCC slip is going to kill the clutch.
It will slip several hundred RPM under light throttle to the point I'm seeing the tach move back and forth cruising...
I am dealing with a 07 Avalanche, 5.3 243 heads, 224 cam, DOD delete, 4l60 trans and a 3200 stall. I am having problems keeping the converter locked and I also have TCC slip sometimes. The TCC will...
My bad. Not sure why I posted it as 99. Thanks for the info.
I am in need of some help finding a 4L80 segment to work with a 9381344 OS.
This is a 99 Transam 4L60 tune file
Thanks for any help
Kris
Your right. It's proportional fueling. I cut it down to little to nothing and it's there but very light. Still needs more work.
I have another car I am working on today so it will be later this afternoon for me to mess with this one. I have not had a chance to look at this log but here it is. It's a cold start and a drive to...
Its a surge very light
Well the car does better but still there. I can feel this at 2500rpm. I feel like there is a underlying problem that I am missing. I have had bigger cams in smaller motors act better than this. It...
Well I tried all the above with no good results. The timing pulled to 32 made it worse. I did try a 12.5 afr in the 1000 to 2000 rpm and that seems to be the only thing that helps. It clears up the...
Thanks Carl. I will report back in a bit
Kris
I just installed a cam in a 2006 Z06. The cam is a TSP 242/250 612/613 on a 114. This is there small LS7 cam. The car has Kooks 1"7/8 headers, catback, maf housing, and a Vararam CAI. With the above...
I have run into this before and if i remember correct it has to do with the abuse mode. Put it back to stock and try it to see if the problem goes away.
I am converting my 2001 Vette M6 to 4L60 auto. I need to convert the tune to auto. I currently have 12593358 OS for the M6. I have not been able to find a 12593358 for an auto. Does anyone have a...
310 kpa map? every time it hit 310 it goes into REP. Why is it hitting 310 and the boost is below 20 psi on the boost gauge.
Maybe the wrong sensor?
2nd pass has several issues I can see.
1. Boost reading is way off
2. Frame 106 the TPS drops to 70% and Shane say it was on the floor
3. TPS never goes to 100% after frame 106
4. Frame 117...
My first question is why the wrong boost reading?
First pass was a good pass with no issues.
Problem is still there so can someone tell me how the best way to scale this back for him and will the tune still be close. How much do you scale it back?