Hey there!
I insalled some Mace cams and can't gain a lot of power.
I would need a good base tune for these cams. All the settings for cam adjustment, VE and other necessarry changes to torque and...
Type: Posts; User: RauPower
Hey there!
I insalled some Mace cams and can't gain a lot of power.
I would need a good base tune for these cams. All the settings for cam adjustment, VE and other necessarry changes to torque and...
I would like to learn how to tune a diesel car. We have so many here in India. I can repay you in curry!
I have tuned a Dodge Caliber SRT4 the other day. Stage1 I set the boost to 1bar across the rpms.
If you need help with the file post yours together with a log file. Here a log (it was raining and I...
Got the first tune going. Thin runs pretty good. If I would hook up a wideband and could check KR... That would help to get the thing even better!
But check this tune and log....
Hey there!
I have a 2008 Caliber SRT4.
Removed cats and use an CAI.
Right now I have managed to get the throttle to stay open all the way through the rev band. Stock I had 0,75bar boost.
Now,...
South West Germany :drivin::usa:
Thanks! But I don't have this option.. :( 42315
Any other idea - like in throttle or torque...?
Best Regards
Thomas
Hey there!
I have a Hummer 2, 6.0, from 2006 here and wanted to get the speed limter off! I did it like usually in "speedo" then "limiter" and set everything higher (200km/h) is OK. so, the car is...
Here is my latest tune...
What would you usually change when you upgrade to a 10mm bigger throttle??
Tom
:-)
Sorry, I just sent the file without double checking it. I usually set the low octane table across the board to -5° to the values in high octane.
What are you guys thinking of this mod??...
Well, fuel quality is OK, tried couple different gas stations and I found the same problem on C6 2007, C6 2008 and C5 2003!
On my first C6 LS3 I had up to 18° advanced between 2500 to 4000 (went...
100 (German) oktan!
Midrange is OK, till about 4000rpm nice torque - no knock at all!
4000rpm dead on you can add what you want and even 1 degrees will show knock! Even stock is knocking 2 degrees...
Hi!
I am from Germany and we tune a lot of European vehicles. Since about 1 year I use HPT and it works great! There is only one problem I have and I can't figure out what's wrong.
The first 2 cars...