Hello All,
How does the process work to set my computer up to run in closed loop MAF tuning on a 2015 Tundra? I am somewhat familiar with GM LS engines. Does the process work the same?
Any tips,...
Type: Posts; User: SnakesC6
Hello All,
How does the process work to set my computer up to run in closed loop MAF tuning on a 2015 Tundra? I am somewhat familiar with GM LS engines. Does the process work the same?
Any tips,...
Hey Guys, I have the same issue happening, except I just finished up SD tuning and I am turning the MAF back on. This thing runs great until then. I posted the tune with the settings that are now...
Hello All, there is so much good information in this thread! But being that Im so green at this, the more I read the more confused I get. I have been taken shots at trying to get my idle dialed in...
9598095981Hey Guys
I attempted to focus on the VVE and MAF curve. I'm not sure if I am using the correct tools to dial them in. But here are my latest files. Please take a look and let me know if...
Yeah I thought 30 degrees was getting up there. I didn't think about correcting the MAF Curve and VVE tables first. I will start over and get them adjusted. Thanks Guys for responding!
95932Hello All,
I am new to the tuning world and completely frustrated!:banghead: I just finished up swapping my stock cam out in my LS2 with a beefier Tick Performance cam. 231/235/111. I have made...
[QUOTE=joe53016;557383]
"(Equivalence ratio Commanded [sensor]) line should be pink"
Thanks for this man! You put some time into writing this. I learned how to get the correct working address...
Yes! Thank you! You were correct! I know get a reading in the graph. I needed to use EQ ratio error math instead of AFR error.
But this raises some more confusion for me now. I have been...
Hey All!,
I am new to the tuning world. I have spent the past few months learning what I can and work up the confidence to do this for real. If anyone could take a look at my first stab at my mid...
Thanks sgod1100. I will give that a try.
Awesome! Thanks for the response guys!
Im not 100% positive that my 06 vette is set up with Can Bus? Here is the log info. I do see Can on the log, but none of it makes sense to me.
1/20/2019 4:10:56 PM
VCM Suite Product: VCM...
dingo16123,
How did you go about changing the PID from #1 to PID 6 on the gauge? I am having the same issue.
Thank you,
Jake
Hello, I am having this exact same issue. Did you ever get your AFR Error graph to work? Im pulling my hair out!
I don't have a issue with connecting and getting a reading from the WB, Its getting the data to record to the MAP AFR error graph.
Here is the log file.
86078
Hey guys, Need some help with the same issue except that I set this tune up from scratch. My WB pid is reading a value but I cant get it to record data into the MAP AFR error graph. Assuming I...