Not what I wanted to hear. Thanks for the info though.
Type: Posts; User: Turbo Silverado
Not what I wanted to hear. Thanks for the info though.
Hello, I am interested in tuning my 2020 6.7 powerstroke TCM. I read somewhere that I need the new MPVI 2 adapter, is that true? I have a MPVI pro wired cable that I bought many years ago. Will that...
Thank you. I appreciate the reply. I can?t stand DOD or the auto start stop. Not sure if you can tune the auto start stop off though. I know there?s a button but would prefer tuning it out if...
Hey, any news on when the 21 Tahoe will be supported? Thanks.
For the 2020 6.7? For some reason their site doesn?t list it as supported. How hard is it to use?
I have HpTuners but know very little about using it. How do I command the gears with the scanner?
Hello, I?m having problems with a known good trans. It won?t shift Into 3rd or 4th. So, long confusing story short, I have a 2wd computer in a 4wd truck and the transmission only shifts into 2nd and...
Hello, I was wondering what the difference between a 2002 and 2003 4L60E is. I have a built transmission in my 2002 and am in the process of putting it in my 2003 truck. Well I thought they were...
Hello, I have an ECU already tuned for my setup but it was from my old truck. I?m still in the process of finishing the engine swap. I was wondering if an ECU from a 2003 Silverado 5.3 2wd will work...
I have 3.7 Beta. When I try to save as I get a "Unhanded exception has occurred in your application" I tried to uninstall and reinstall. Anyone else have this problem?
alright, thanks. I don't want to tune both at the same time because of credits. Would you recommend FICM tuning first or no?
Hey, BigCE. Are you studded or anything? My stuck is completely stock and I was wondering if your tune would work for a good starting point. What about just using the FICM tune on a stock engine for...
How much PW should be added if everything else is stock?
Does anyone have a FICM file for a 2003 or 2004 6.0 before the ford update?
Does anyone have any info on Ficm tuning? Where is a good place to start when messing with the Ficm
Wideband and Offset Spreadsheet
http://www.thetuningschool.com/downloads/wideband_offset.xls
This was VERY helpful. Thank you so much.
I figured it out. I used the spreadsheet on this thread
http://www.hptuners.com/forum/showthread.php?28176-How-to-Setup-Your-Wideband-in-Hp-Tuners
I saw that but I am unsure of what values to put in the table. I was wondering if anyone recently added an Autometer wideband and could just tell me.
Hey, I was just wondering if someone could walk me through setting up my autometer wideband with the scanner. I found a couple guides but they are all older versions of the scanner. Any help would be...
Does anyone have a guide to remove all torque management on a 2008 silverado 5.3 4x4? I have found many guides but its for older trucks and all the tables look completely different. Also what values...
My truck loses all power and my gauge reads crazy lean in higher rpm's. I haven't been able to hook my wideband to laptop for data logging yet. Are there any major obvious issues with this tune? The...
What about pulling a tune from a vehicle and saving it to use for comparing. Do I need to license he vehicle to save it?
Thank you. I appreciate it. So I will only need to download the program and transfer the saved tunes when I get a new computer right?
My HP Tuners is coming in the mail later today and I want to start tuning my truck. I have an older laptop now but plan on getting a new one soon. Would it be alright to install it on my old computer...
Thank you so much for the help. I'm ordering HP Tuners tomorrow then. Where is a good place to download the stock tunes from?