hi guys, on the subject of injector scalers, I asked the question on here for 80s data and someone posted this charts, just looking back wondered if it was the correct data, ive got some green 42s I...
Type: Posts; User: orangeute338
hi guys, on the subject of injector scalers, I asked the question on here for 80s data and someone posted this charts, just looking back wondered if it was the correct data, ive got some green 42s I...
I saw on fb a while ago hp tuners were going to start on the older eecv falcons, has anyone heard any news? can au falcon be tuned with hp tuners?
Im keen to know if its possible also. I have heard that its part of the ecu that can only be changed with the ford scanner, something do with with having to change the ecu type.
yeah i have heard they are around the same as a na 6. would be cool something different to do one up 12second 4cyl falcon. i had a look after i posted and seen hp doesnt support even any of the...
can the ecoboost falcon be tuned with hp?
has anyone in aus done any work with them? what sort of times do they run stock or modded? i have seen in the states the ecoboost mustangs arent to slow
it ended up just being throttle body was leaking. because he had a inlet manifold top half for a au (rajab racing looking one) it didnt seal up to good at the tb and was also leaking at the 2 halfs....
you sure about that? i have my table at max 140 and i get about 20psi with that.
I found the on/off boost threshold and lowered the tp for when it uses the cl boost control and that got rid of the external opening at low throttle, I had the wg sonenoid closed till 4500rpm so ...
has anyone else had trouble flashing early ba turbos?
i had one that would let me read the tune but not licence it and today tried another one which wouldnt even let me read the tune, comes up...
yeah i just wasnt sure if there was any tricks to get it to spool. one thing i am considering it a quick spool valve block off one side of the twin scroll and is meant to spool quicker. i have a 125...
its all the stock numbers
where about is that?
i tried more timing and leaner around 2k try and get some boost on the stally but nothing.
i did a 3rd pull to check my boost and its a bit fluttery i think i will have to get a flash box so i can...
i tried setting the timing at 3 at 2000rpm and 1 and above on the table but if you see in that run it was high and only got to 12deg before i backed off, might have needed to hold it for a bit...
im 99% sure its cutting throttle just not sure why it would throws no codes..
is it possible to get more then a few psi with the stock zf with big turbos? when i had the stock turbo i could get it to stall to 3k and 10psi now with the gt42 its going to 2psi and no much over...
its stock tune. the flapper is fine we pulled the dump off and check it out nice and stiff and not sticking, we pulled the hose off to the actuator (wg getting no boost, so should overboost like...
when he got the car it didnt have any keys so he got a new ignition and key and put that in, but car wouldn't start because for whatever reason, so tried to flash it didn't work sent the info log and...
Ok so any idea why would only make low boost even with no boost going to wastegate?
I emailed the guys a while ago and they sent me a file to flash in to the car but still didn't work so no idea
my has a ba 5spd manual turbo and we just put a larger cooler a plenum 3inch intake and 2.5/3inch piping rest stock. it was only going to 2-3psi. we removed the hose off the front of the turbo to the...
It's not a major issue the failed flashes it doesn't happen that often, I make sure I run the car for 5mins before I flash if had been sitting over night and is ok. If it happens again I'll have to...
All I know from asking here is the tables are back to front in the cam angle tables when it says -10 it's actually advanced not retard and 10 would be retarded. As well it's not in deg of the cam say...
I don't think it was that because even happened once in the middle of nowhere luckily I had the capa box has happened on 2 different cars, I just fear if I was to flash a mates and they don't have a...
A few times when I have got to flash my car it has done the pcm erase then failed in the write, then it hasn't been able to write because can't find file to start. Luckly I still have a old capa box...
Ended up going to Ford $400+ later and it's running so hopefully will be able to tune it now. I'm a bit worried tho don't want to try and then it not work and then have to go back to Ford to get...