I'm being a bit stupid here. I thought the whole point of the problem with LED lights was that the SLSV pin had to see a resistance when the brake pedal is not pressed - the point being it's...
Type: Posts; User: Sidewaysste
I'm being a bit stupid here. I thought the whole point of the problem with LED lights was that the SLSV pin had to see a resistance when the brake pedal is not pressed - the point being it's...
Thank you. I've tweaked it and will report back.
Hi, As per the title I have a curious situation that when the rev limit is reached, the engine cuts out. I don't mean temporarily as you might expect from, well a rev limiter, I mean if the limit is...
Jon,
Ive checked, double checked and triple checked all of the inputs to the TAC. I'm not running LED brake lights and the PCM/TAC inputs are relay controlled so they switch simultaneously and...
Thank you for the reply. I'm obviously not using the right search terms as I've found *nothing* where anyone has had the same problem as me. Could you provide links please?
I presume from that...
Hi Apologies if this isn't the right area.
I still cannot for the life of me get cruise to work on my vehicle. It's a Landrover with a 2007 LQ9 and P59 PCM in it. It's as if there's a hard fault...
I should mention that I'm not in the USA and our emissions regs are reasonably lenient.
I understand that it's not allowed in the USA, I presume that's because under certain conditions it can be...
I've tried connecting the TCC brake switch ( pin#33 according to my wiring diagram) through an nc relay operated by the brake light switch so that it activates at the exact same time as the NO brake...
I'm trying to get the cruise control operational on my 1995 Landrover Discovery that has an LQ9 mated to the original Landrover manual gearbox.
My VSS is plumbed to an abs sensor and calibrated so...
86681866828668386684
Well sods law, It didn't stall on me.
Next problem is to figure out why the cruise control doesn't work...
Thank you. I was surprised at just how dimensionally similar it is to the old RV8, apart from being quite a bit taller! The photo is a bit deceptive. That pipe is only 3" diameter as there isn't room...
Hi, the MAF is in the right way around and the honeycomb is installed. I suspect it's position is the problem though. As you can see, there's nowhere else for it to go, there simply isn't room....
I'm still running the MAF.
I've only had the MPVI2 a matter of hours so am *very* new to it.
I'm used to MAP/SD tuning on aftermarket ECUs but from what I've read so far, getting rid of the MAF...
86639
I think that should be my tune attached.
I really have no idea if it's setup properly for the manual swap, I guess that's kind of what I'm asking.
I'll attach a log as soon as I've got...
Hi All, I've just received my MPVI2 and am getting to grips with it..
One of the first issues I'd like to sort and am having trouble with, is stalling.
The engine is an LQ9. The issueis that it...