No image
Type: Posts; User: Rodsctsv
No image
So after the engine is at operating temp you can shut it off fill up or let it set for a few minutes and it will not start turns over fine , let it set for 15 or longer it fires wright up , Ive made...
Correct I do have headers , ok thx I will try that
this is another log different tune
Changed air filter 2 months ago afr started swinging bad logged and changed the maf with the correction multiply% after a few weeks of doing still afr swings changed filter back still swinging and a...
I know most remote CTSV tuners , I'm on my 3rd , I do most of the tuning now but still need help with the tranny
I run around 80 on lambda , 12 ctsv coupe with FBO and E80 , I run the AEM 30-0333 and suggest switching to lambda,, 82 is a little lean on daily hits IMO mayb on trac days a few times . I'm at 75...
Doh , thx , ended up having to move the maf up and rescalen
74051 I changed air filter and from idle to around 2000 RPM and less its erratic, I can reduce that down but Im lost where the idle airflow is
74052
74050 Ok got it , I need to know where is the idle airflow its reworded in 3.6
I took a screen shot of the aiflow tab
but keeps giving me an error when uploading
All the vids on youtube shows a idle airflow but mine desnt show can someone circle the idle airflow in 3.6 thx
I removed a jms bap , and was in the middle of installing a dsx pump , I went to drive the car and to get some fuel out but it would just turn over , I'm getting a U0109 lost communication with fuel...
Made some runs last night and first pass was a little rich lambda average was .73 so I leaned it up and I thought it was to much lambda average was.81 so I put some more fuel back in and enriched the...
Ok thx for the response , I have a 5in CAI with matching MAF , I was hoping that was not maxed out , I'm on E85 with 1000 ID injectors , along with dual nozzle meth injection , thx for your input
I feel dumb , I see it now during the small burn out then again in 2nd going in to 3rd , I dunno why I didn't earlier ok thx , also here is another run about 30 minutes later from a older tune I...
My tuner says there is knock , I don't see it in the log can someone point this out ? during the pull
Mods on a ctsv 8.66 lower 2.38 upper 90mm tb LT headers, 1000ID injs 5" CAI E85 and dual nozzle meth pre/post . My FP seems a little low with the JMS at 18v ((verified with meter )) its around 52...