Search:

Type: Posts; User: JaegerWrenching

Page 1 of 13 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    14
    Views
    386

    looks like you've maxed out your MAP sensor, it's...

    looks like you've maxed out your MAP sensor, it's sitting at 255KPA desired 37psiA
  2. Take the bigger number divided by the smaller and...

    Take the bigger number divided by the smaller and it will yield the percent of change. 4.1/3.27=1.253 or 25.3% more gear. Just remember anything above 1.0 is the percent increase and anything below...
  3. It's all good I figured as much with how we...

    It's all good I figured as much with how we sporadically respond to things and then are gone for a while lol. I'm super busy myself, currently moving to a new building, but Yes i did get the 6.4...
  4. Yeah i've read and heard about that i've also...

    Yeah i've read and heard about that i've also heard the later 15 and up trucks lost two clutches on that same overdrive clutch pack. When you rebuilt yours did you increase the number of clutches or...
  5. They shouldn't need to be cleared if they have...

    They shouldn't need to be cleared if they have been cleared after adaptives have been turned off, but sometimes I feel it doesn't work so I make it a habit of clearing them every time. As for adding...
  6. The 3-4 was the worst one for me as well, it's...

    The 3-4 was the worst one for me as well, it's the most inconsistent and i had issues on my personal truck with shift flare like you're talking about until i reset the adaptives and cleared the KAM....
  7. Turn off anticipated shifting and torque based if...

    Turn off anticipated shifting and torque based if you want to use your oss map only, also clear you adaptives and KAM, i asked for adaptive and KAM resets to be added to the scanner recently and they...
  8. Replies
    11
    Views
    603

    Hmm i don't think he has anything like that, car...

    Hmm i don't think he has anything like that, car is 100% stock.


    Ok ill retest with everything off when the car comes back.
  9. Replies
    11
    Views
    603

    103715 New issue is this, latest beta insalled

    103715 New issue is this, latest beta insalled
  10. Replies
    6
    Views
    450

    Don't look at it like the the torque is actually...

    Don't look at it like the the torque is actually the real torque, in stock form it will be close but the torque number has more to do with your fuel amount being sprayed than real torque. It just so...
  11. Replies
    6
    Views
    450

    Think of lambda like making dough, if you have...

    Think of lambda like making dough, if you have water and dry ingredients like flower/yeast we want to mix them so that the dough isn't too watery or too dry. It needs to be just right, well just...
  12. Replies
    6
    Views
    450

    My guess is you're not getting there because...

    My guess is you're not getting there because you're running into lambda limits. I moved them to where they will be mostly out of the way, you will have to remove some fuel in your torque to fuel map...
  13. Replies
    11
    Views
    603

    I got it to read and just sent it in, ill post...

    I got it to read and just sent it in, ill post the file when i get it back.
  14. Do not use a 50/50 calculator, instead go back to...

    Do not use a 50/50 calculator, instead go back to stock and review stock timing values in it for some reference, negative/low timing can really help spool the turbo and make the truck drive and...
  15. Replies
    91
    Views
    5,681

    103472

    103472
  16. Replies
    11
    Views
    603

    I typically do but i was in a hurry, It's a...

    I typically do but i was in a hurry, It's a friend's daily driver and we were out talking in the parking lot about tuning and he asked if i could tune it, so i tried to read it and here we are lol....
  17. Replies
    11
    Views
    603

    I was using my MPVI-2 and the Beta 4.7.4x, i'm...

    I was using my MPVI-2 and the Beta 4.7.4x, i'm assuming you say pull the fan relay because it runs constantly while you're reading the file?
  18. Replies
    11
    Views
    603

    Trying to read a 2017 infinity q60

    I'm looking to see if anyone has read a q60 yet, i have one at my shop and it doesn't auto populate the ECU, does anyone know what ECU it has so i can manually select it? If you have a read i'd...
  19. Replies
    91
    Views
    5,681

    I'm curious how much information is really in...

    I'm curious how much information is really in that book, my guess is not enough as per usual. As for your spread sheet Jim it's very well done. I've never seen graphs in excel before, it's brilliant.
  20. Replies
    6
    Views
    417

    lol for real, "my window switch worked when i...

    lol for real, "my window switch worked when i brought it to you." uhhh i just R&R spark plugs...... "well it must be the tune" :crazy:
  21. Replies
    6
    Views
    417

    Looks like you got it figured out, time to let it...

    Looks like you got it figured out, time to let it RIP!! Watch it start breaking random parts now because it's never been above 37 lol
  22. Replies
    2
    Views
    726

    Zero out your open slip tables completely and...

    Zero out your open slip tables completely and retest. You will have that 10-200 rpm of "converter slip" when it's asking for 4rpm of slip. You can see when the log goes to a 0rpm slip demand it...
  23. Replies
    16
    Views
    490

    If the valve body has been changed the tcm will...

    If the valve body has been changed the tcm will need a new "stock tune" from the dealer or someone with a good scan tool. This is purely for the solenoids response times to be programmed into the...
  24. Why are you getting high temps? Is your coolant...

    Why are you getting high temps? Is your coolant system bled and functional? Is your cooling fan operational? Do you think you've caused an issue with a tune? Details leading up to the issue is always...
  25. So you no longer have torque input into the TCM...

    So you no longer have torque input into the TCM since it's a cummins swap. This is where it gets complicated IMO and you have to know how to tune a transmission to get a good result, or at least...
Results 1 to 25 of 313
Page 1 of 13 1 2 3 4