Hmmm
How's it feel??
I really like the boost (255kpa!!) and the KR isnt so bad (but you're usually only at 4,5 degrees so...)
BUT why is your advance "flooring" to 2-4.5 degrees during...
Type: Posts; User: WopOnTour
Hmmm
How's it feel??
I really like the boost (255kpa!!) and the KR isnt so bad (but you're usually only at 4,5 degrees so...)
BUT why is your advance "flooring" to 2-4.5 degrees during...
That'd be sweet. But I'm waiting to see if we will eventually be able alter with the coil dwell periods before I'll consider switching coil modules.
Maybe try R&Ring G103 on the RH side rear of...
That's exactly why we completely rewire the pump (eliminating the fuse block and stock relay) with 12AWG minimum (dependin on BAP model used) and add a voltage amplifier (KenneBell Boost-A-Pump) in...
Setting it to 1 is neccessary because this map was to based on the effects of B+ (and resulting injector current slope) against the injector delivery slope FOR THE STOCK INJECTORS. (the 60# will be...
Here' the 08 tables
WOT
<EDIT> Sorry, ignore my previous comment... I had my AFR calculator set to EQV ratio instead of Lambda
PS> I've just uploaded the stock tune from an 08 Sky to the...
I think the fact that you are going off the deep end of 280% tells you that the tables are not really being rescaled doesnt it? When I tried it (rescaling to 240%) I ended up with the exact same...
Exactly, those of us that are hoping to see this are bumping our heads on the stock sensor at peak boost levels. I've already sourced 3 and even 4 bar versions of the same Bosch TMAP but since the...
I love that. Great Creedo!
:cheers:
WopOnTour
oic
So use the older 3.0 drivers (receommended) unless you have problems then?
Is it a chipset dependant thing or something? (gotta love USB standards lol)
WOT
Someone's filling your head with ---
The "event recorder" you are referring to is used for "black box" type recording in the event of an accident sufficient for airbag deployment. And even then it...
Hi Ken
Just changing to a new laptop with Vista and need to manually install the USB drivers
I'm a bit confused by your comment in this post:
"version 2.xx.xx are a newer set of drivers"
The...
I understand that
But you kind of missed my point. The 120 you "calculate" is ALL that will ever be...
My point was the new E37 ECM used in the 2007 2.2 Ecotec is ALSO used in a number of other...
I have a feeling the 07 2.2 might get support someday (as it shares a "newer" ECM model with other models)
But the ECM used in the 03-06 Ion (and 05-06 Cobalt) 2.2 was a bit of an "orphan" box so...
IFAIK there will be no way to put the 2005 cal file into the E37. BUT if you replaced your crankshaft with the 2007 58X version and THEN convert it all over to the new Coil On Plug ignition it MIGHT...
Yup
Deleted duplicate Post
Someone at GMPP??... or GMPD??? (big difference)
Either way, the tendancy/policy is to err on the "safe side" in emailed response communique' with "end-users"
But there's nothing like good ol'...
Hmm
What OS# are you working on??
WOT
Dan,
I've just been setting the P0068 enable RPM to 9,999 to "disable" it and nothing else
Works for me
Wop
Many people have been setting the rev limits to 7400-7500 and shifting at 7000-7300
There's no float, at least at the stock lifts
Not saying this is not without risk but I've got a number of...
Did you try the reset business?
ie. disconnect sensor (in free air) power ON > code 2 for 10-15 seconds
Power off, reconnect sensor Power ON> wait for steady LED
I had something similar once...
Should be easily enough to add support I would think
AFAIK it's exact same P11 PCM as the J-bodies
Same 4T40E automatic as well (but different 5speed)
Maybe PM Chris with your VIN
Wop
The slider bar in chart view is OK but the graph cursor line is too limiting IMO(visible frame range only). If it would automatically scroll forward and backwards when you reach the end of the...
Any way to add better control for viewing logs in the scanner?
Just some basic navigational additions such as:
Frame Reverse/Rewind, Frame Forward, Frame Select Slider Bar, and/or Goto Frame???...
That's a nice trick to get the LC1 analog output to match the digital!
But dont just create the custom PID and forget (like I did) to go into LM Programmer and change the LC1 voltage curve to 0.00V=...