Search:

Thanks fo answering my questions. I really appreciate it. :cheers:

So, its just a accurate on one side, as on both- As far as WOT??

Sorry, no cats, no y-pipe. Headers to 18" exhaust pipe, to bullets. Race only application. Now what???

So, if I want to accurately log AFR, with the HISTOGRAMS, using HP, and the new LC-1, would I need 2 WB02 sensors??? One for the right , and one for the left?????? If you only read on one header, is...

Looks like Innovative is comming out with the LC-1, wanted to know if it would work like the LM-1, without the screen that they supply. any reason I wont be able to use with HP, to log wideband AFR,...

Thanks Chris.
I have a heads/cam 02 z28. Guess I should have said that.

A couple of questions:

A "tuner" tuned my car, and changed the IFR tables. He made them smaller. I have stock injectors....

ok, now I'm more confused. I guess I should say I have a heads, cam, 2spd powerglide, bla,bla,bla.

I have no wideband, other that what is on the Dyno.

I was trying to get away from using the...

I want to take off the MAF, and all 02 sensors for my race only application.

I think this is what is refered to as a SD tune. Here are my questions.

I have read WS6's SD Tuning thread, but have...

I just avg one of my idles and the map is at 80. Is this what is causin the sugre. Should I avg something else as well to find the problem. I thought the "swing" would go away staying in open loop....

What is a high MAP value?
Can that be changed with tuning?

I know these columns have already been scaled. Just continue until the surging goes away? It seems when I scale this VE, it doesnt make any difference, other than it doesnt want to start. How long do...

I have a heads/cam package with a 244/246 .612 .613 on 114+2 XER on my 02 A4. I have a surge that I cannot get rid of. This is a track only car, that has the O2's diabled, still currnely using a MAF...

I have not been able to have anyone tell me how to get rid of what I call false knock, which only shows in this scanner software, from what I can tell. I havent changed the timing yet, because it...

:huh2: :huh2: :huh2: :huh2: ??? ??? ??? :-X :-X :'(

Honestly, I think it should read something like minimum timing value, not max retard, IMO. As far as the 24, that is what came over from Edit, I guess. How do I combat false knock? If I get knock...

My file was downloaded from my tuners LS1 Edit file.
When I pull this car, it sees whatever timing that is in that section. In other words, mine says 24 all the way across. It is not pulling out 24...

I have found that I have more timing than what is in the HO tables. I also noticed, that everyone that asks this question, doesnt get the answer :-X. Well, I FOUND THE ANSWER!!!!!!! I was on the dyno...

3 gallons 93, 5 gal 110.0

This cant be this hard.

Where is KEITH on this????

This is a race only application. This is also a nitorus run, at the track. The air/fuel shows good on the dyno.

The motor has been completly rebuilt, new forged pistons, rods, etc, machined,...

19 22 12 15 38 40 42 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43
19 22 12 15 38 40 42 43 43 43 43 43 43 43 43 ...

How do I post a screenshot?
Ill post up my timing tables if I get help.

Well, 19 - 3 = 16???

So what happens if I have the torque set at 640, the max torque at 640


BUT.................................


The RPM> 7000

Speed<255 MPH?

I have the same thing going on. My high octane is copied to low octane, the only thin I see that would add is in the IAT-Add and it is at -3? Will that add or subtract timing?

Timing at 20 in HO,...

So, if the PE is 1.316, and the open loop FA is 1.13, the open loop F/A will be used???