Search:

You're absolutely right, but in theory, would the PE/EQ multiplier still work if the value is less than 1?

Is it ok to go below 1 multiplier under PE as I'm reducing fuel, 0.8, 0.6 etc..?
Sorry for the newbie question

Yes, it's the 5th channel in the list on the left side 'Mass Airflow (SAE)' Should I pick/add a different channel?

Logging an LS9, I'm trying to find my ignition timing coordinates on the main spark table by logging RPM, Spark, & MAF (g/s). But MAF (g/s) is not showing any readings! I assume that I should be...

I did & they provided the info regarding injector type & part number, I'm not sure if they can provide any further help as they don't use HPtuners for tuning. My next step will to contact the...

Ironically, those injectors came along with the Mast Black Label 900 motor, which I believe is Mast's most expensive crate motor. The motor is brand new, so I won't be able to replace the injectors...

True, I was looking for something to start with, some ballpark figures

Hi Guys,

Got an LS7 equipped with the Fast 85LBS (part #30857-8) pump gas. Can you please list the steps & numbers needed to dial in those injectors.

Thank you

What should I do? Just uncheck the SES Enable box for each corresponding number?

Preparing a Z06 for track use I installed a custom racing exhaust, with no catalytic converters, so now the system is throwing the 420/430 codes. What is the best way to disable those codes?

I'm reviving this great thread as I'm still trying to figure how to set my cutoff (LS9/manual) to be best suited for drifting. The key as per this thread as I understood it, is adjusting both tables...

I also found this thread
https://forum.hptuners.com/showthread.php?40009-LS3-strange-rev-limiter&highlight=strange+rev+limiter
The solution in the above thread was by disabling both spark & ETC &...

You mean disable ETC? as it's enabled in my current tune. I believe in order for this to work the "Cmd Torque Delta" table would have to be modified also, but I'm not sure how!

I'd appreciate your...

I appreciate your help

I use an LS9 on a drift car, the stock rev limit settings are very unsuited for drifting as it's very slow & has a some sort of a delay logic, it's like you lift of throttle for 1-2 seconds & that...