Search:

Type: Posts; User: JeremyBlackwell

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Any way to get RTT on '97 Corvette or change PCM to newer model?

    My 1997 Corvette has a stroked LS2 with a massive cam, and real time tuning would be a VERY convenient feature to have. Any way to change the PCM / ECU to a newer model which allows real time tuning...
  2. Having multiple 'test' PIDs using the same sensor...

    Having multiple 'test' PIDs using the same sensor must have indeed been the issue. AFR Error % is working perfectly now! Thanks!
  3. One more thing I just thought of before I dig...

    One more thing I just thought of before I dig into things...if there are user configurable PID which reference the SAME SENSOR ('Air Fuel Ratio' in this case), will that cause a conflict with other...
  4. Bill, I just came back here to post that the...

    Bill,

    I just came back here to post that the issue is solved. However, I'm not quite sure how...

    After I posted my last reply, I went to the Scanner and deleted the other three user...
  5. Hi, I do have AFR set up as a PID, which is...

    Hi, I do have AFR set up as a PID, which is USER.9004. Also, one of my four attempted PID for AFR Error % appears to be set up correctly as per your instruction, which is USER.9008.

    Are these...
  6. Okay, here you go! Thanks.

    Okay, here you go! Thanks.
  7. Yes. The AFR on Scanner reads accurately...

    Yes. The AFR on Scanner reads accurately compared to the LM1, so that is not the problem. Thanks for your suggestion though.
  8. Problem setting up AFR ERROR % using LM-1 through EGR pin on '97 C5. TRIED EVERYTHING

    Hi guys,

    I am encountering the same issue as shown here ( http://www.hptuners.com/forum/showthread.php?p=303549 ) with no resolve despite lots of searching and trail/error, so I wanted to see if...
  9. Hi guys, Sorry to dig up a slightly old...

    Hi guys,

    Sorry to dig up a slightly old thread. But, given that I am encountering the same issue with no resolve despite lots of searching and trail/error, I wanted to open this back up to see if...
  10. On the '97 Corvette, do I need to add Pin 9 or...

    On the '97 Corvette, do I need to add Pin 9 or Pin 55 or ???
  11. Wiring LC1 into '97 Corvette NOT using A/C switch or Pro EIO box?

    Hey guys,

    Right now, my 1997 Corvette is using the A/C Pressure Switch as the LC1 wideband signal wire, but it's HOT outside and I need to do some logging and A/C would be nice to have while doing...
  12. I know the AFR is overly rich, but I am using...

    I know the AFR is overly rich, but I am using this as a caution of thermal management more than anything. I have a good bit of experience with forced induction on Supras, etc and don't feel...
  13. oops, I had forgotten to attach the log file and...

    oops, I had forgotten to attach the log file and the map! I attached them to the first post now.
  14. '02 Z06 Turbo has sudden problem when transitioning into boost

    I am suddenly having some problems that I cannot figure out. The car is a '02 Z06 with STS twin turbos and 60lb injectors, running HP Tuners version 2.1.14 with enhanced 2-bar and RTT.
    Here is the...
  15. this?

    this?
  16. Here is the file.

    Here is the file.
  17. Nope, it says '2-bar MAP - Speed Density', but no...

    Nope, it says '2-bar MAP - Speed Density', but no (RTT) beside it...If you are the owner of HP Tuners, is there a chance you can check to see if there is indeed no RTT for a 2002 LS6 (z06), or if I'm...
  18. No RTT for a 2002 LS6 yet either then?

    No RTT for a 2002 LS6 yet either then?
  19. Thanks for the reply, that is the one I wound up...

    Thanks for the reply, that is the one I wound up buying last Friday and it works great!
  20. There are multiple GM part numbers listed, and...

    There are multiple GM part numbers listed, and I've seen many more. Very frustrating. You would think the correct part number would be included in the HELP file to make things easy...
    I've seen...
  21. No I didn't remove it. This sucks, I can...

    No I didn't remove it.


    This sucks, I can smell fuel in the oil now it's flooded so much and will have to change the oil before starting it :( Anyone know if that part number I just posted is...
  22. Great, thank you sir!

    Great, thank you sir!
  23. After some research, it looks like the AC Delco...

    After some research, it looks like the AC Delco map sensor that was recommended in a thread here might be the wrong Delco part number.....can anyone verify this? I may have a 2.5bar MAP sensor, which...
  24. '02 Z06 TT: upgraded to 2-bar MAP sensor with 2-bar enhancement, WON'T START NOW!

    Hey guys. I followed the install insructions on the help file to upgrade to the 2-bar enhanced OS, and also copy/pasted my previous VE map into the sub-100kpa zones. I just installed a Delco 2-bar...
  25. Thanks for the responses guys. One of you said...

    Thanks for the responses guys. One of you said it isn't out yet, and the other posted up a link. From what I've seen I assume 'Shizon' is right and RTT isn't available yet for the '02 Z06 with...
Results 1 to 25 of 26
Page 1 of 2 1 2