Did you end up selling the motor and ECM? I have a friend who just built a 87 monte carlo ss aero coupe.
I am trying to help him get it dialed in cause it idles like shit and what not but whats...
Type: Posts; User: floridanick
Did you end up selling the motor and ECM? I have a friend who just built a 87 monte carlo ss aero coupe.
I am trying to help him get it dialed in cause it idles like shit and what not but whats...
zone boundaries
disregard.
I wanted to buy an outright new TCM for my car but my serv#24290348 is not on the drop down choice to pick from what does this mean?
Yes I did a support request and Erik from HP tuners was a big help with diagnosing things and it turned out it was my fault with somehow clicking my. AEM X series wideband on the wrong ECU channel...
My VTT tables were off so that made it worse but I still wanted to unlock tcm for some additional shift functions I have read can be programmed into it. Do you think its worth getting it unlocked?
Was the VTT setup incorrectly.. at least appears to be the case now. knock on wood.
that sounds good but not getting results as expected.. header gasket is shit so I am on hold with any more tuning until I can seal them up again...
who did your tune? I have a 2019 camaro ss e85 2" long tubes and see alot of differences in your tune vs mine. I have never seen zeros for timing in 400 rpm before, your spark table is a kinda rough,...
Sorry was thrown off by the way you have the pids for driver pedal vs throttle position , it is showing less than 99.6% so thought you might have been hitting a vtt throttle cut.
did your knock go...
I am about to send my TCM to HP to unlock my 19 ss A10 because it is slipping but am worried about the lack of support online with how and what is being tweaked. Is everyone holding cards close to...
you are not reaching full throttle. need to adjust your torque tables pedal 100% throttle body is only showing 92%.
I just edited your file with 10% more on your VVT which should open your...
my 2019 ss wont stay in open loop if I set readiness to a negative. very annoying having to manually force it in the scanner.
Yes multiple times and usually need to do that on occasion with my AEM x-series.
Another thing I just remembered is in the scan special functions its like it thinks my car is a manual. I dont see...
I have a 2019 SS A10 and trying to figure out why the scanner no longer shows what gear I am in as it used to a week ago.
On top of that it will randomly drop off all my pids except for o2 voltage...
Kyle, was the one who got me past the first zone issue and now its hitting a different area and he hasn't be available to assist further.
having issues with zone boundaries, a friend helped when it first happened by having me edit my zone PR boundaries in the tune but hit a different part and happened again and stuck.
Attempting* to...
8 degrees of knock with 10.9ms inj pw?! Wish I knew more to help but those are crazy figures. Most I ever seen was 5.9ms on e85 overly rich .790 lambda wot but now I am around 5.1 and .850s on my 19...
0000
Interesting thank you for that I have never had it happen before and all the other rpm cut offs are 6900rpm.
Is there a way to compare VVE tables? My stock file looks like my current file which leads me to believe it is stock. The Maf I can put back to stock easy though. But I am scratching my head because...
2019 2ss a10 stock read
Not sure if this is a beta thing or what is going on but I am forcing open loop for math tuning and cannot get the car to stay in open purely on tune file. I am having to force it in scanner.
...
Static knock table solved my problems! Zero them out and poof no more false knock retard!