Update: Shared log from on the bench and in the truck to Hp tuners. They are saying that could something causing interference and not allowing the VM scanner to pull all PIDS. I should full some...
Type: Posts; User: codemain19
Update: Shared log from on the bench and in the truck to Hp tuners. They are saying that could something causing interference and not allowing the VM scanner to pull all PIDS. I should full some...
CRAP! yeah right around 30mins.
Wiring in truck seems fine everything checks out. Sent more info logs in a ticket to Hp tuners we will see what they find if anything.
That didn't work after looking everything up the pins are the same. The bench has 2 more pins but this is for newer PCM's that have the CANBUS. Something isn't working properly from the PCM to the...
After comparing the bench harness and the OBD2 in the truck I notice that the truck doesn't have as many pins in the OBD2( VERY STRANGE) I will start looking them up to see if that could be the...
I read a file with just the ECM no TCM and still have the same issue. VCM scanner will not pull all PIDS. Could it be something in the wiring from the PCM to the OBD2 port in the truck? its odd to me...
Thanks for your response. I can not pull ECM from the truck. It will only pull the TCM. The harness is the only way I can read and write. Its odd. I did pull both TCM and ECM from on the bench but...
Truck is a 2004 dodge ram 1500. I can not read or write a tune in the truck. When I pull the PCM I can get it to read and write on a bench harness. When I go into the VCM Scanner to datalog so I can...
Hey bill so all ngc3 can be read by bench and are supported? I still can’t get my ngc3 for my 2004 ram to read the ecm. The trans reads fine. I’m think about swapping to an 05 computer now. Reason...
What different tuning software did you use?
Stock value is 0.86. I think I know what Is wrong. For whatever reason the stock tune has a 1.0 for the reluctor teeth. If I change that value to 40 teeth and go back into the wizard the stock tire...
I am trying to use the tire gear wizard on my 98 k1500. The tire size is 32.8 and the gears are 4.11's. When I confirm this change it maxes out my transmission shift tables to 256mph and causes the...
Any update of this? I have a similar issue with a 2004 Ram. Doing the same thing