Hi to all, actually I have an 2.3 2015 mustang an Im new on ford tuning would like to know how can start to increase the boost in that vehicle?
I would be very grateful If someone would share a...
Type: Posts; User: jquequezana
Hi to all, actually I have an 2.3 2015 mustang an Im new on ford tuning would like to know how can start to increase the boost in that vehicle?
I would be very grateful If someone would share a...
Hi, actually Im trying learn how to tune an 2015 2.3 mustang and would like to know what mods are u apply on the engine (is stock turbo?) and how much psi load with that tune?
regards
ZR1 3bar map sensor
Are u fix the barometric correction ? doing a baro breakout ?
Share u tune bro would like see how your timing table is set
How much boost and which AFR are u ?
Thanks for u reply
What table need to touch to achieve that?
86184
My TPS don't open 100% and see some KR
86186
Hello I have the same issue with an E38 runing an LY2 v8 from an Silverado 2008 AT, the engine don?t start an the fuel cut type is : STARTED I apply vats path and disable diagnostics check ...
What...
Hi to all, I'm running an custom LFX single turbo setup with MAF only tune,
The maf only is because I'm from Peru and nobody there tune or know how to tune that kind of engines ... they prefer jdm...
First its because, the engine don't arrive with the turbo's.
And I think that my single turbo HX40 would move more air than the two stock turbo's, and would be more difficult manage the LF4 setup...
I have and LFX Custom single turbo setup ... runing 8psi but I?m looking for more boost and recently I bought and LF4 and I?m going to try start with my custom single turbo setup (FMIC) 🤔 .
I...
Hi to all, Is posible start stand alone that kind of engine with the stock PCM ?
I know it?s posible on GM removing the vats but not sure if it is posible on Ford
Regards
Thx for u reply... it?s because I had the pcm (e39a) dead... and the had an e39 available to start the car... fortunately I managed to recover the e39a...
Hello I had an LFX 3.6 camaro 2014 and would like know if is posible swap an e39 on that engine ... the current pcm for that year engine is e39A ...
Regards
Im the same issue, u found a solution ?
Hello, 3 days ago I was trying to write an calibration on a client veh?culo (Camaro 2014 LS) and I follow all security advices......
Hello we are working on a custom single turbo for a LFX V6 (camaro 2013) and looking run low boost 6-8psi.
We found several posts talking about its necesary upgrade the map sensor with the #12592525...
Hello, thank you very much for your answers; They helped me a lot and achieve optimize the MAF and the VVE. LTFT betwen -5/5, I wonder if also have to optimize my LNF and how could start with this?
Thanks to all for the replies
I found a tutorial http://gmtune.ru/tuning-fuel-ve-table-using-fuel-trims for VVE Tuning
I'm going to start to follow that tutorial, and I have some question...
Hello
I was doing some changes to my Camaro 2013 v6 manual and was seeing many KRs in my logs.
Some one could review my tuning file and help to improve that?
Logs:...
Thanks for your reply.
Have some question about "you do not seem to be logging Knock Retard (aka Spark Retard in 3.x) - it's very important to log that one" ... I was using the VCM Scanner 3.0.99...
15 Views 0 replies,
Some one can share a tune file please... I'm going to compare that with my stock tune file.
Regards.
Hello world!
I'm really a noob, I have the suite VCM STD for GM and I'm trying improve the performance of my vehicle.
I have a log scan for 30 minutes, and the VCM read file.
Please someone...